PRIME LINE PRODUCTS

For use with cabinets and storage cabinets with glass shelves.Unit: CD8

For use with cabinets and storage cabinets with glass shelves.Unit: CD8

Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8...

Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.Unit: EA

N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on...

N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end.Unit: CD

Prime-line 3/4 in x 5/16 in 0.020 roll formed screen frame is designed for use on sliding aluminum windows. The frame is also used to fabricate replacement screens on storm doors. Prime-line screen...

Prime-line 3/4 in x 5/16 in 0.020 roll formed screen frame is designed for use on sliding aluminum windows. The frame is also used to fabricate replacement screens on storm doors. Prime-line screen frames are manufactured with a slight camber (bow) that provides tension to the finished screen. This features helps eliminate wrinkles in the screen fabric. The screen frame accepts up to.185 vinyl spline and uses miter (angle) cut screen corners.Unit: EA

Extruded aluminum housing, with steel spring; adjustable wheel with center groove. Fits on International Series 900, 925, 950 doors. Contents: 2 roller assemblies; installation screws.Unit: CD2 ...

Extruded aluminum housing, with steel spring; adjustable wheel with center groove. Fits on International Series 900, 925, 950 doors. Contents: 2 roller assemblies; installation screws.Unit: CD2

Spring-loaded. Used on single or double-hung, aluminum or vinyl windows, for use on sash panels designed to tilt in and down from the top. Content 1 left hand latch and 1 right hand latch.Unit: PR ...

Spring-loaded. Used on single or double-hung, aluminum or vinyl windows, for use on sash panels designed to tilt in and down from the top. Content 1 left hand latch and 1 right hand latch.Unit: PR

Water and dust resistant. Used on both storm doors and storm windows. 5/32 in thick. Polybagged.Unit: EA

Water and dust resistant. Used on both storm doors and storm windows. 5/32 in thick. Polybagged.Unit: EA

Steel hook; nite latch feature; universal design; interchangeable, reversible hooks. 4 Hook Assortment, surface-mounted latch style: Hook Style Hole Center: 6-5/8 in. Includes 1 inside latch and...

Steel hook; nite latch feature; universal design; interchangeable, reversible hooks. 4 Hook Assortment, surface-mounted latch style: Hook Style Hole Center: 6-5/8 in. Includes 1 inside latch and pull, 1 outside pull, 1 locking cylinder, 1 keeper and 1 set of installation screws.Unit: CD

Replacing the old Truth EntryGard Series the TH 23020 is a left handed, 9-1/2 in single arm operator with a baked enamel bronze finish. It is made of heavy-duty die-cast zinc. The steel arm, worm...

Replacing the old Truth EntryGard Series the TH 23020 is a left handed, 9-1/2 in single arm operator with a baked enamel bronze finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill.Unit: EA

Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. This...

Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to support steel cables up to 3/16 in Dia.Unit: CD

Prime-Line Shelf Peg, Locking, Plastic, Dimensions: 2-1/8 in L x 11/16 in W x 1/4 in DiaUnit: PK 6

Prime-Line Shelf Peg, Locking, Plastic, Dimensions: 2-1/8 in L x 11/16 in W x 1/4 in DiaUnit: PK 6

2-Piece latch shield. For use on in-swinging doors. Interlocking brackets protect door from forced entry. Includes 1 door bracket, 1 jamb bracket, 1 set of flat head sheet metal screws, 1 set of...

2-Piece latch shield. For use on in-swinging doors. Interlocking brackets protect door from forced entry. Includes 1 door bracket, 1 jamb bracket, 1 set of flat head sheet metal screws, 1 set of one-way sheet metal screws and 1 set of pan head screws for metal doors.Unit: CD

Prime-Line Sliding Glass Door Keeper, Zinc, Dimensions: 4-1/4 in L x 15/32 in W, Includes: (1) Lock, Installation FastenersUnit: EA

Prime-Line Sliding Glass Door Keeper, Zinc, Dimensions: 4-1/4 in L x 15/32 in W, Includes: (1) Lock, Installation FastenersUnit: EA

This item is a "U" shaped glass retaining spline, also referred to as glazing channel. It is typically used with aluminum window frame to cushion and insulate the glass. The product is gray vinyl...

This item is a "U" shaped glass retaining spline, also referred to as glazing channel. It is typically used with aluminum window frame to cushion and insulate the glass. The product is gray vinyl 0.230 in wide x 0.225 in deep and accepts single strength (3/32 in) glass or Plexiglas. 200 ft per roll.Unit: L FT

Painted die-cast inside lock with heavy-duty steel spring bolt, key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring, will replace most locking mechanisms of this type.Unit: CD ...

Painted die-cast inside lock with heavy-duty steel spring bolt, key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring, will replace most locking mechanisms of this type.Unit: CD

Prime-Line Sliding Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Cylinder Size: 7/8 in, Key Type: Different, Bolt Hole Diameter: 13/64 in, Zinc, Aluminum, Gray, Dimensions: 1-3/4 in W, Suitable for:...

Prime-Line Sliding Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Cylinder Size: 7/8 in, Key Type: Different, Bolt Hole Diameter: 13/64 in, Zinc, Aluminum, Gray, Dimensions: 1-3/4 in W, Suitable for: Showcase Sliding Doors, Includes: (1) Lock with (2) Strikes, (2) Ferrules, (2) Keys and Installation ScrewsUnit: EA

This sliding screen door handle and latch is non-handed and used great aluminum screen doors as well as other patio door manufacturers. It contains a black plastic inside pull and outside pull. The...

This sliding screen door handle and latch is non-handed and used great aluminum screen doors as well as other patio door manufacturers. It contains a black plastic inside pull and outside pull. The handle mounting holes are 3 in. The steel latch is 2-9/16 in long with a 11/16 in projection and slides up and down to engage the keeper A 125 or A 217.Unit: EA

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.Unit: CD 2

Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.Unit: CD 2

N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia nylon housing. The 7/8 in...

N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia nylon housing. The 7/8 in horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in Dia pin set in its nylon housing. To install, lightly tap them into the pre-drilled top mount holes.Unit: EA

Tandem steel ball bearing rollers; adjustable steel housing assembly; housing dimensions: thickness 3/4 in; length 3-1/8 in; height 1-1/32 in. Housing width: 11/16 in. Roller edge type: Concave....

Tandem steel ball bearing rollers; adjustable steel housing assembly; housing dimensions: thickness 3/4 in; length 3-1/8 in; height 1-1/32 in. Housing width: 11/16 in. Roller edge type: Concave. Contents: 1 roller assembly.Unit: CD

This item is a "U" shaped glass retaining spline, also referred to as glazing channel. It is typically used with aluminum window frame to cushion and insulate the glass. The product is gray vinyl...

This item is a "U" shaped glass retaining spline, also referred to as glazing channel. It is typically used with aluminum window frame to cushion and insulate the glass. The product is gray vinyl 0.215 in wide x 0.230 in deep and accepts single strength (3/32 in) glass or Plexiglas. 200 ft per roll.Unit: L FT

Prime-Line Night Latch and Locking Cylinder, Number of Cylinders: 1, Cylinder Type: 5-Pin, Keyway Type: Kwikset, Backset Size: 2-9/32 in, Aluminum, Brass, Suitable for: 1-3/8 to 2-3/8 in Thick...

Prime-Line Night Latch and Locking Cylinder, Number of Cylinders: 1, Cylinder Type: 5-Pin, Keyway Type: Kwikset, Backset Size: 2-9/32 in, Aluminum, Brass, Suitable for: 1-3/8 to 2-3/8 in Thick Doors, Includes: (1) Night Latch with Locking Cylinder and Trim Ring, (2) Keys, (1) Mounting Plate, (1) Keeper and Installation ScrewsUnit: EA

Prime-Line 5/16 in offset extruded aluminum panel clips attach storm windows or screen panels to storm door frame with aluminum knurled head thumbscrews.Unit: CD

Prime-Line 5/16 in offset extruded aluminum panel clips attach storm windows or screen panels to storm door frame with aluminum knurled head thumbscrews.Unit: CD

Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238)...

Most doors, in recent years, have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods (GD-52238) and a clear understanding of wire size and handing.Unit: BAG