Account
My Items
OR
Plated die-cast handles outside handle with threaded studs and inside handle with holes supplied with stainless steel machine screws.Chrome FinishHole Center In=2-1/4Color=ChromeBRASSUnit: PR ...
Plated die-cast handles outside handle with threaded studs and inside handle with holes supplied with stainless steel machine screws.Chrome FinishHole Center In=2-1/4Color=ChromeBRASSUnit: PR
Top hung, adjustable height, aluminum straight bracket, 3/4 in flat edge plastic, steel ball bearing wheel.Unit: CD 2
Replacing the old Truth EntryGard Series the TH 23025 is a right handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm...
Replacing the old Truth EntryGard Series the TH 23025 is a right handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill.Hand=RightFinish=WhiteSINGLE...
This is a 5 in Dia wall protector. It is constructed of white vinyl and is self adhesive. The surface is paintable and textured. Helps to protect your walls from impact damage from a door knob and...
This is a 5 in Dia wall protector. It is constructed of white vinyl and is self adhesive. The surface is paintable and textured. Helps to protect your walls from impact damage from a door knob and is ideal for repair on walls that have already sustained damage from a door knob.Unit: CD
Allows operation of garage door opener without a transmitter, mount to the exterior door jamb and hard wire to opener, rated at 24/36 V maximum.ELECTRICUnit: CD ...
Allows operation of garage door opener without a transmitter, mount to the exterior door jamb and hard wire to opener, rated at 24/36 V maximum.ELECTRICUnit: CD
N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some...
N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some cases, to make this part work the lower tabs may need to be trimmed off. Never remove the upper tabs nearest the adjusting screw. The housing upper tab snaps into a slot on the inside of the door frame, while the door rests on the bottom tabs that extend out from the base of the housing.Unit: CD ...
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.Dia Hole...
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.Dia Hole In=2Finish=BrassROUND - PLATED STEELUnit: CD 2
Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly.Roller D x W In=1-1/4 x 3/4Tab Style=Plain...
Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly.Roller D x W In=1-1/4 x 3/4Tab Style=Plain BackSTEELUnit: CD
Prime-Line spline-in aluminum screen frame latch is installed into the spline channel of window screen, it is used to hold bottom of screen to wood framed window sill and secured by hooking over a...
Prime-Line spline-in aluminum screen frame latch is installed into the spline channel of window screen, it is used to hold bottom of screen to wood framed window sill and secured by hooking over a ball-head screw mounted in the window frame, 25-Piece per tub, installation screws are included."BACK ROOM"Finish=MillTub=25Unit: EA
Deadbolt housing constructed of solid high strength bronze alloy, Jimmy-Proof design prohibits forced entry by spreading of door frames. Surface-mounted, cross bolt locking feature also resists...
Deadbolt housing constructed of solid high strength bronze alloy, Jimmy-Proof design prohibits forced entry by spreading of door frames. Surface-mounted, cross bolt locking feature also resists forced entry and mounts to wood or metal doors and frames. This original Segal brand product includes a flat strike and a tamper-resistant shutter guard.CLAMSHELLSingle CylinderFinish=Brushed ChromeStrike=FlatSEGAL - 4-1/2 INCHUnit: CD
N 7368 is a solid brass privacy lock and pull for a pocket door with a classic bronze finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is...
N 7368 is a solid brass privacy lock and pull for a pocket door with a classic bronze finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 3-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.Finish=BronzeMETAL - PRIVACYUnit: CD
Reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast and must use an E-2145 if...
Reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center.Hole Center In=3-15/16Finish=WhiteDIE-CASTUnit: CD
Unit: CD
This items is a 3 in x 3 in aluminum screen patch for repairing holes and/or small tears in your aluminum window screens and screen doors. It can be easily attached without using special tools. Easy...
This items is a 3 in x 3 in aluminum screen patch for repairing holes and/or small tears in your aluminum window screens and screen doors. It can be easily attached without using special tools. Easy to follow instructions are included."MAKE-TO-FIT"Size In=3 x 3Finish=AluminumALUMINUMUnit: CD
K 5071 is designed for out swinging wood or metal screen and storm doors that are 1 to 1-1/4 in thick. The outside handle has a contemporary design with a tie-down screw at the bottom of the outside...
K 5071 is designed for out swinging wood or metal screen and storm doors that are 1 to 1-1/4 in thick. The outside handle has a contemporary design with a tie-down screw at the bottom of the outside handle in a black finish. It comes complete with night lock, fasteners and the keeper.Unit: CD
Prime-line 3/8 in plastic corner for window panels are designed to fit into square-cut ends of 3/8 aluminum window frame material to repair or construct new aluminum-framed window panels. Square-cut...
Prime-line 3/8 in plastic corner for window panels are designed to fit into square-cut ends of 3/8 aluminum window frame material to repair or construct new aluminum-framed window panels. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner."BACK ROOM"Tub=20Finish=WhitePLASTICUnit: PK20
This items is a 3 in x 3 in "Stick-on" fiberglass screen patch for repairing holes and/or small tears in your fiberglass window screens and screen doors. It can be easily attached without using...
This items is a 3 in x 3 in "Stick-on" fiberglass screen patch for repairing holes and/or small tears in your fiberglass window screens and screen doors. It can be easily attached without using special tools. Easy to follow instructions are included."MAKE-TO-FIT"Finish=CharcoalFIBERGLASSUnit: CD 5
Prime-Line Re-Keying Kit, Steel, Suitable for: Kwikset 5-Pin Doors Lockset, Includes: (3) Pre-Cut Keys, Pins, Special Tools and InstructionsUnit: EA ...
Prime-Line Re-Keying Kit, Steel, Suitable for: Kwikset 5-Pin Doors Lockset, Includes: (3) Pre-Cut Keys, Pins, Special Tools and InstructionsUnit: EA
This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.155 in Dia. It is a top quality round, serrated...
This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.155 in Dia. It is a top quality round, serrated vinyl with a hollow core. Color is gray."MAKE-TO-FIT"Gray - 500' Length - RollSize In=.155VINYLUnit: ROLL
U 9003 is a clear acrylic mirror retainer clip. Fits 1/4 in thick glass mirrors with a ribbed universal design.Size In=1/4PLASTIC - CLEARUnit: CD ...
U 9003 is a clear acrylic mirror retainer clip. Fits 1/4 in thick glass mirrors with a ribbed universal design.Size In=1/4PLASTIC - CLEARUnit: CD
Extended lip strike with adjustable tab, for use on wide jambs. 2 in hole center to extended lip, 2-1/2 in overall width of strike.Finish=Brass PlatedSTEEL û EXTENDED LIPUnit: CD ...
Extended lip strike with adjustable tab, for use on wide jambs. 2 in hole center to extended lip, 2-1/2 in overall width of strike.Finish=Brass PlatedSTEEL û EXTENDED LIPUnit: CD
The TH 23056 is a casement window sash lock that offers a low-profile. It only requires a 5/8 in stop thickness. It is white painted die-cast zinc construction. Mounting holes are 2 in apart. When...
The TH 23056 is a casement window sash lock that offers a low-profile. It only requires a 5/8 in stop thickness. It is white painted die-cast zinc construction. Mounting holes are 2 in apart. When the lever is turned, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping.Finish=WhiteLOW PROFILEUnit: CD
Saw wax is a lubricant for use on semi high-speed saw blades. The regular application of this clinging grease film to the cutting tool serves as a heat reducing coolant on the cutting teeth and work...
Saw wax is a lubricant for use on semi high-speed saw blades. The regular application of this clinging grease film to the cutting tool serves as a heat reducing coolant on the cutting teeth and work surface. The anti-heating properties in the formulation work by keeping the wax on the saw blade, reducing the tendency to spin off the saw blade. The result is a smooth and quick cut, adding longer life to the cutting teeth and helps eliminate burring.Tube Size Oz=16Unit: PK 1 ...
This high tension steel spring roller assembly fits onto the Columbia Uni-Fit Series door. This roller assembly has a 1 in steel ball bearing roller mounted in the housing. The end of the flat steel...
This high tension steel spring roller assembly fits onto the Columbia Uni-Fit Series door. This roller assembly has a 1 in steel ball bearing roller mounted in the housing. The end of the flat steel spring inserts into a slot within the screen door frame while the flat tabs extending in front of the roller restrict the roller from retracting too far into the door frame as it rolls.Roller D x W In=1 x 1/4STEELUnit: CD