Account
My Items
OR
This sliding window lock is constructed of an extruded aluminum housing with a die-cast cam-action lever and it comes in an aluminum colored finish. The design of this lock is manufactured to fit on...
This sliding window lock is constructed of an extruded aluminum housing with a die-cast cam-action lever and it comes in an aluminum colored finish. The design of this lock is manufactured to fit on older style, metal framed, horizontal sliding windows.Unit: CD
M 6033 is a swinging shower door catch that mounts onto the swinging door. The brass finished housing contains a spring loaded nylon latch and is adjustable. The mounting holes (slots) are 1 in...
M 6033 is a swinging shower door catch that mounts onto the swinging door. The brass finished housing contains a spring loaded nylon latch and is adjustable. The mounting holes (slots) are 1 in apart.Unit: EA
Injection-molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape or snaps into extrusion fin. Used by several shower door manufacturers.Unit: CD 2
Fits 5-1/2 in and 6 in hole spacing's on dead latch and deadbolt. Uses six 3 in screws that install on the vertical side of the strike closest to the stop molding. These 3 in screws allow for a...
Fits 5-1/2 in and 6 in hole spacing's on dead latch and deadbolt. Uses six 3 in screws that install on the vertical side of the strike closest to the stop molding. These 3 in screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins.Unit: EA
This items is a 3 in x 3 in "Stick-on" fiberglass screen patch for repairing holes and/or small tears in your fiberglass window screens and screen doors. It can be easily attached without using...
This items is a 3 in x 3 in "Stick-on" fiberglass screen patch for repairing holes and/or small tears in your fiberglass window screens and screen doors. It can be easily attached without using special tools. Easy to follow instructions are included.Unit: CD 5
N 7079 is a solid brass pocket door pull and flush edge pull for a pocket door with a satin chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the...
N 7079 is a solid brass pocket door pull and flush edge pull for a pocket door with a satin chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.Unit: CD
Use on out-swinging doors with 2-3/8 in standard residential backset. Protects against forced entry. Includes 1 shield, 2 carriage bolts and 2 cap nuts and washers.Unit: CD
Plated die-cast handles outside handle with threaded studs and inside handle with holes supplied with stainless steel machine screws.Unit: PR
K 5116 is designed for out swinging wood or metal screen and storm doors that are 1 to 1-1/4 in thick. The outside handle has a contemporary design with a tie-down screw at the bottom of the outside...
K 5116 is designed for out swinging wood or metal screen and storm doors that are 1 to 1-1/4 in thick. The outside handle has a contemporary design with a tie-down screw at the bottom of the outside handle in a white finish. It comes complete with night lock, fasteners and the keeper.Unit: EA
Prime-Line Bug Seal, Vinyl, 7 in L, 3/4 to 1-3/8 in WUnit: EA
Top hung, adjustable height, aluminum straight bracket, 3/4 in flat edge plastic, steel ball bearing wheel.Unit: CD 2
Allows operation of garage door opener without a transmitter, mount to the exterior door jamb and hard wire to opener, rated at 24/36 V maximum.Unit: CD
Replacing the old Truth EntryGard Series the TH 23025 is a right handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm...
Replacing the old Truth EntryGard Series the TH 23025 is a right handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill.Unit: CD
This is a 5 in Dia wall protector. It is constructed of white vinyl and is self adhesive. The surface is paintable and textured. Helps to protect your walls from impact damage from a door knob and...
This is a 5 in Dia wall protector. It is constructed of white vinyl and is self adhesive. The surface is paintable and textured. Helps to protect your walls from impact damage from a door knob and is ideal for repair on walls that have already sustained damage from a door knob.Unit: EA
N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some...
N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some cases, to make this part work the lower tabs may need to be trimmed off. Never remove the upper tabs nearest the adjusting screw. The housing upper tab snaps into a slot on the inside of the door frame, while the door rests on the bottom tabs that extend out from the base of the housing.Unit: EA ...
The H 3511 casement window operator is a right hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc...
The H 3511 casement window operator is a right hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.Unit: EA
Deadbolt housing constructed of solid high strength bronze alloy, Jimmy-Proof design prohibits forced entry by spreading of door frames. Surface-mounted, cross bolt locking feature also resists...
Deadbolt housing constructed of solid high strength bronze alloy, Jimmy-Proof design prohibits forced entry by spreading of door frames. Surface-mounted, cross bolt locking feature also resists forced entry and mounts to wood or metal doors and frames. This original Segal brand product includes a flat strike and a tamper-resistant shutter guard.Unit: EA
Prime-Line spline-in aluminum screen frame latch is installed into the spline channel of window screen, it is used to hold bottom of screen to wood framed window sill and secured by hooking over a...
Prime-Line spline-in aluminum screen frame latch is installed into the spline channel of window screen, it is used to hold bottom of screen to wood framed window sill and secured by hooking over a ball-head screw mounted in the window frame, 25-Piece per tub, installation screws are included.Unit: EA
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.Unit: CD
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.Unit: CD 2
Prime-Line stamped aluminum 2-Piece hardware set is used to hang screens on wood framed windows. Set includes top mounted hooks that mount to window frame and keepers that mount to the screen frame....
Prime-Line stamped aluminum 2-Piece hardware set is used to hang screens on wood framed windows. Set includes top mounted hooks that mount to window frame and keepers that mount to the screen frame. Hardware set may be used on most all screen frames. Mill (silver) finish, 2 sets per card. Installation screws are not included.Unit: CD
Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly.Unit: CD
Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - #8 sheet metal screws for 3/16 in and smaller offsets, #10-24 machine screws for 5/16 in and larger.Unit: CD
This items is a 3 in x 3 in aluminum screen patch for repairing holes and/or small tears in your aluminum window screens and screen doors. It can be easily attached without using special tools. Easy...
This items is a 3 in x 3 in aluminum screen patch for repairing holes and/or small tears in your aluminum window screens and screen doors. It can be easily attached without using special tools. Easy to follow instructions are included.Unit: CD