PRIME LINE PRODUCTS

The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.Safe Weight Load 35 lb.OD Peg=1/4Finish=Nickel...

The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.Safe Weight Load 35 lb.OD Peg=1/4Finish=Nickel PlatedSTEEL/CHROMEUnit: CD 8

Prime-line 3/4 in x 7/16 in screen corners for Andersen window screens are designed to be only used with Andersen screen frames. These are primarily a replacement for broken or cracked corners but...

Prime-line 3/4 in x 7/16 in screen corners for Andersen window screens are designed to be only used with Andersen screen frames. These are primarily a replacement for broken or cracked corners but can be use to fabricate new screens if the correct frame is available. These corners are used when the screen frame is miter (angle) cut.Size In=3/4 x 7/16Finish=TanPLASTICUnit: PK 20

This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The...

This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, A 163 or A 166. The inside latch lever has a nite lock feature.Hole Center In=3Color=BlackPLASTICUnit: CD

The H 3511 casement window operator is a right hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc...

The H 3511 casement window operator is a right hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.Unit: CD

Heavy-duty extruded aluminum lock with tamper-resistant single hex security screw and wrench for use on metal horizontal sliding windows. Securely locks window in closed or ventilating position and...

Heavy-duty extruded aluminum lock with tamper-resistant single hex security screw and wrench for use on metal horizontal sliding windows. Securely locks window in closed or ventilating position and helps prevent accidental opening of window by child.Unit: CD 2

U 9002 is a clear acrylic mirror retainer clip. Fits 1/8 in thick glass mirrors with a ribbed universal design.Size In=1/8PLASTIC - CLEARUnit: CD 6 ...

U 9002 is a clear acrylic mirror retainer clip. Fits 1/8 in thick glass mirrors with a ribbed universal design.Size In=1/8PLASTIC - CLEARUnit: CD 6

Prime-Line 1-1/4 in double end clips are used to attach screens or storm windows to openings in a flush mounting."MAKE-TO-FIT"Lgth In=1-1/4Finish=WhiteFLUSH - PLASTIC - DOUBLE WINGUnit: CD ...

Prime-Line 1-1/4 in double end clips are used to attach screens or storm windows to openings in a flush mounting."MAKE-TO-FIT"Lgth In=1-1/4Finish=WhiteFLUSH - PLASTIC - DOUBLE WINGUnit: CD

Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32 in x 1-9/32 in track. Contains 2 guides, 4 side saddles and 2 sets of...

Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32 in x 1-9/32 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners.Wdth In=2-1/2PLASTICUnit: CD

The 32 in chrome shower door towel bar set.Lgth In=32Finish=ChromeDIE-CASTUnit: CD

The 32 in chrome shower door towel bar set.Lgth In=32Finish=ChromeDIE-CASTUnit: CD

Extruded aluminum inside pull with wood handle; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 7/16 in. Handle Type:...

Extruded aluminum inside pull with wood handle; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 7/16 in. Handle Type: Surface-Mounted. Latch Style: Clamp Style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners.Hole Center In=4-15/16Finish=BlackALUMINUMUnit: SET

Fits 5-1/2 in and 6 in hole spacing's on dead latch and deadbolt. Uses six 3 in screws that install on the vertical side of the strike closest to the stop molding. These 3 in screws allow for a...

Fits 5-1/2 in and 6 in hole spacing's on dead latch and deadbolt. Uses six 3 in screws that install on the vertical side of the strike closest to the stop molding. These 3 in screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins.Hole Spacing In=5-1/2 to 6Finish=Satin NickelSTEEL - COMBINATIONMAXIMUM SECURITYUnit: CD

Prime-Line Patio Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Latch Throw: 1/2 in, Aluminum, Zinc, Dimensions: 11/16 in W, Suitable for: Showcase Sliding Doors, Includes: (1) Lock, (2) Installation...

Prime-Line Patio Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Latch Throw: 1/2 in, Aluminum, Zinc, Dimensions: 11/16 in W, Suitable for: Showcase Sliding Doors, Includes: (1) Lock, (2) Installation ScrewsUnit: CD

Contemporary design reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. Accommodates key-in knob locksets or...

Contemporary design reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts.Unit: CD

Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.Roller D x W In=1 x 1/4SPRING TENSIONUnit: CD 2 ...

Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.Roller D x W In=1 x 1/4SPRING TENSIONUnit: CD 2

Use on out-swinging doors with 2-3/8 in standard residential backset. Protects against forced entry. Includes 1 shield, 2 carriage bolts and 2 cap nuts and washers.Finish=GraySTEEL - OUT-SWINGUnit:...

Use on out-swinging doors with 2-3/8 in standard residential backset. Protects against forced entry. Includes 1 shield, 2 carriage bolts and 2 cap nuts and washers.Finish=GraySTEEL - OUT-SWINGUnit: CD

Aluminum bracket with 1/8 in x 1/2 in flat nylon roller, used by International "King-Queen" Series, also used by Academy and A-1 Aluminum.Roller Dia In=1/2NYLONUnit: CD 2

Aluminum bracket with 1/8 in x 1/2 in flat nylon roller, used by International "King-Queen" Series, also used by Academy and A-1 Aluminum.Roller Dia In=1/2NYLONUnit: CD 2

Galvanized carbon steel aircraft cables used on extension spring doors. 1/8 in replaces most wood doors, 3/32 in replaces most fiberglass and aluminum doors.Dia In x Lgth Ft=1/8 x 12WITH LOOP...

Galvanized carbon steel aircraft cables used on extension spring doors. 1/8 in replaces most wood doors, 3/32 in replaces most fiberglass and aluminum doors.Dia In x Lgth Ft=1/8 x 12WITH LOOP ENDSUnit: CD

Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes one piece with an adhesive back. 0.045 in wall thickness.Size In=96 x...

Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes one piece with an adhesive back. 0.045 in wall thickness.Size In=96 x 3/4 x 3/4Color=ClearVINYL90 DEGREESUnit: EA

This item is a screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.140 in (9/64 in) diameter. It is a top quality...

This item is a screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.140 in (9/64 in) diameter. It is a top quality round, serrated vinyl with a hollow core. Color is gray. 500 ft per roll."MAKE-TO-FIT"Gray - 500' Length - RollSize In=.140VINYLUnit: ROLL

Prime-Line 3/4 in x 7/16 in plastic corner for window screen panels are designed to fit into square-cut ends of 7/16 aluminum screen frame material to repair or construct new aluminum-framed...

Prime-Line 3/4 in x 7/16 in plastic corner for window screen panels are designed to fit into square-cut ends of 7/16 aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner.Unit: EA

This item is a screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.210 in (7/32 in) diameter. It is a top quality...

This item is a screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.210 in (7/32 in) diameter. It is a top quality round, serrated vinyl with a hollow core. Color is black. 25 ft per polybag.Unit: CD

Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel...

Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails.Hole Center In=3-15/16Finish=Black/WoodINTERNAL LATCH -...

White plastic housing, flat edge plastic roller, top rollers adjust "up" to provide anti-lift protection, bottom rollers adjust "up and down" for alignment, used on Hilite 200 Series windows.Unit:...

White plastic housing, flat edge plastic roller, top rollers adjust "up" to provide anti-lift protection, bottom rollers adjust "up and down" for alignment, used on Hilite 200 Series windows.Unit: CD 4

The H 3686 casement crank handle is bronze die-cast and has a 11/32 in bore spindle. This fits most operators with a 11/32 in bore spindle such as H 3568 through H 3571. It offers excellent torque...

The H 3686 casement crank handle is bronze die-cast and has a 11/32 in bore spindle. This fits most operators with a 11/32 in bore spindle such as H 3568 through H 3571. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3 in.Proj x Bore In=3 x 11/32Painted=BronzeUNIVERSAL - DIE-CASTUnit: CD