PRIME LINE PRODUCTS

Extruded aluminum inside pull; clamp-latch with metal activator; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 1/2 in; used by...

Extruded aluminum inside pull; clamp-latch with metal activator; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 1/2 in; used by many patio door manufacturers. Handle Type: Surface-Mounted. Latch Style: Clamp Style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners.Unit: SET

Blue polyethylene guide and white polyethylene side saddles, restores smooth operation of track mounted drawers. Contains 2 guides, 4 side saddles, 2 sets of installation fasteners. Note: Fits a 1/4...

Blue polyethylene guide and white polyethylene side saddles, restores smooth operation of track mounted drawers. Contains 2 guides, 4 side saddles, 2 sets of installation fasteners. Note: Fits a 1/4 in x 3/4 in track.Unit: CD

Heavy-duty die-cast housing with brass face and 5-pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate and 2 screws.Unit: CD

Heavy-duty die-cast housing with brass face and 5-pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate and 2 screws.Unit: CD

Steel ball bearing roller, adjustable steel housing assembly. Used by International and other glass door manufacturers. Replaces old-style extruded aluminum assembly. 5/8 in thick, 2-1/8 in L,...

Steel ball bearing roller, adjustable steel housing assembly. Used by International and other glass door manufacturers. Replaces old-style extruded aluminum assembly. 5/8 in thick, 2-1/8 in L, 1-3/16 in H, 3/4 in overall thickness, 5/8 in W housing dimension. Concave roller edge type. 1 roller assembly.Unit: CD

N 7274 is a satin nickel pocket door flush edge pull. It mounts onto the leading edge of a pocket door and has a pull that is pulled out from its flush position to pull the pocket door out of the...

N 7274 is a satin nickel pocket door flush edge pull. It mounts onto the leading edge of a pocket door and has a pull that is pulled out from its flush position to pull the pocket door out of the wall. Afterwards, the pull retracts back into a flush position.Unit: EA

The item is a "Step" Type Drill Bit 3-3/4 in length with an 1/8 in Dia starter tip and then steps up to a 7/32 in Dia. This is used for drilling the correct sized holes in a window screen frame that...

The item is a "Step" Type Drill Bit 3-3/4 in length with an 1/8 in Dia starter tip and then steps up to a 7/32 in Dia. This is used for drilling the correct sized holes in a window screen frame that uses a Plunger Latch for securing the screen into the window frame.Unit: EA

Prime-Line Square Cut Screen Frame Corner, Plastic, White, Dimensions: 3/4 x 5/16 in, Suitable for: PL14080 Screen FrameUnit: EA

Prime-Line Square Cut Screen Frame Corner, Plastic, White, Dimensions: 3/4 x 5/16 in, Suitable for: PL14080 Screen FrameUnit: EA

Plated heavy metal casting secures door while allowing 2 in of viewing or ventilation. Includes swing loop keeper, bar lock and installation screws. 3-7/8 in bar length. Prefix U on factory number...

Plated heavy metal casting secures door while allowing 2 in of viewing or ventilation. Includes swing loop keeper, bar lock and installation screws. 3-7/8 in bar length. Prefix U on factory number denotes new Defender Security packaging.Unit: CD

N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick.Unit: EA

N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick.Unit: EA

K 5067 is a standard pneumatic screen door closer for medium weight wood or aluminum out swinging doors. It has a 10-1/2 in L barrel and has an aluminum finish. It comes complete with mounting...

K 5067 is a standard pneumatic screen door closer for medium weight wood or aluminum out swinging doors. It has a 10-1/2 in L barrel and has an aluminum finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.Unit: CD

Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts.Unit: EA

Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts.Unit: EA

Clear vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.Unit: EA

Clear vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.Unit: EA

Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip...

Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip with 3/8 in W groove. Includes bracket, bottom pivot and 3 installation screws.Unit: CD

Slide bolt surface mounts to face of door. Two keepers allow for surface or mortise frame installation. Includes one 1-1/4 in surface keeper and one 9/16 in x 1-5/8 in mortise keeper. Prefix U on...

Slide bolt surface mounts to face of door. Two keepers allow for surface or mortise frame installation. Includes one 1-1/4 in surface keeper and one 9/16 in x 1-5/8 in mortise keeper. Prefix U on factory number denotes new Defender Security packaging.Unit: CD

Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes...

Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.Unit: CD 2

Prime-Line 3/16 in x 3/16 in die-cast corner keys are used to replace damaged or broken corner keys found in storm window frame assemblies. May also be used to manufacture new storm windows and...

Prime-Line 3/16 in x 3/16 in die-cast corner keys are used to replace damaged or broken corner keys found in storm window frame assemblies. May also be used to manufacture new storm windows and screens. Additional sizes and styles are available as are slide bolts and tilt keys.Unit: PK20

Defender Security Door Strike Plate, Brass, Polished, 2-3/4 in L, 1-1/8 in W, Hole to Hole: 2-1/8 in, Suitable for: Grade I or Grade II Lockset and Schlage Latches, Includes: (1) Strike with (2) #8...

Defender Security Door Strike Plate, Brass, Polished, 2-3/4 in L, 1-1/8 in W, Hole to Hole: 2-1/8 in, Suitable for: Grade I or Grade II Lockset and Schlage Latches, Includes: (1) Strike with (2) #8 x 1 in Phillips Flat Head Combination Screws, Mounting ScrewUnit: EA

This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.230 in Dia. It is a top quality round, serrated...

This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.230 in Dia. It is a top quality round, serrated vinyl with a hollow core. Color is gray.Unit: FT

1-7/16 in L plated steel housing and 1-3/4 in W x 15/16 in H strike with 3/4 in spring loaded nylon roller, designed for use on interior closet and cabinet doors. With screws.Unit: CD

1-7/16 in L plated steel housing and 1-3/4 in W x 15/16 in H strike with 3/4 in spring loaded nylon roller, designed for use on interior closet and cabinet doors. With screws.Unit: CD

Prime-line 3/4 in x 5/16 in x 36 in screen frame kits include all the product necessary to build 1 (one) screen frame. the kit includes frame, corners and spline and instructions but does not...

Prime-line 3/4 in x 5/16 in x 36 in screen frame kits include all the product necessary to build 1 (one) screen frame. the kit includes frame, corners and spline and instructions but does not include the screen fabric. screen fabric available separate. frame and corners are white finish.Unit: EA

Galvanized carbon steel aircraft cable used on 7 ft H torsion spring doors.Unit: CD

Galvanized carbon steel aircraft cable used on 7 ft H torsion spring doors.Unit: CD

Prime-Line Roller Assembly, Number of Rollers: 1, Bearing Type: Ball, Roller Edge Type: Concave, Roller Width: 5/16 in, Roller Diameter: 1-1/8 in, Steel, K-Tab Mounting, Dimensions: 2-5/16 in L x...

Prime-Line Roller Assembly, Number of Rollers: 1, Bearing Type: Ball, Roller Edge Type: Concave, Roller Width: 5/16 in, Roller Diameter: 1-1/8 in, Steel, K-Tab Mounting, Dimensions: 2-5/16 in L x 3/4 in W x 1-3/16 in H, Suitable for: T.M. Cobb and Other Patio DoorsUnit: EA

N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by many bi-fold door...

N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by many bi-fold door manufacturers.Unit: CD 2

The H 3966 is a stone die-cast crank handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This...

The H 3966 is a stone die-cast crank handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This tee handle is stone in color. The Tee design is often used to replace the normal crank handle when it interferes with window blinds.Unit: CD