Features
                      
                      
                    
- Screw the cap and the nozzle onto the tube. Unscrew the cap to open the product
- Apply a small amount of material on one of the two surfaces. An irregular surface may require more material to fill all the irregularities
- Put the two pieces in contact and press for a few seconds until the pieces are fixed
- After releasing the pressure, wait a few minutes to obtain good strength for handling
- The total strength is reached at approximately 24 hours
- Immediately after use, clean the tip of the nozzle with a tissue and close the lid. Store the tube or bottle upright in a cool, dry environment
- The product used to clean the surfaces will depend on the nature of the surfaces
- In some cases, a cotton cloth, clean and free of lint, moistened with solvent can be used
- Dry immediately with another cloth before the solvent evaporates from the surface
- In other cases, consult the cleaning method with the manufacturer of the substrate materials
                      More Specifications
                      
                      
                    
- Applicable Materials: ABS Aluminum Beech Wood Oak Wood Pine Wood Polycarbonate PVC Stainless Steel Steel
- Color: Clear
- Compositions: 2-Methoxyethyl 2-cyanoacrylate Hydroquinone 2-Propenoic acid 2-methyl- methyl ester
- Flammability Rating: 2
- Flash Point: 74 deg C
- Form: Gel
- Functional Cure Time: 24 hr
- Media: CO2 Foam Water Spray
- Net Content: 3 g
- Odor/Scent: Characteristic
- Setting Time: 2 to 35 s
- Shear Strength: 2800 psi
- Specific Gravity: 0.948
- Temperature Rating: 65 to 140 deg F
- VOC Content: 0.19 g/L
 
           
