PETERSON MFG

Sealed, 4 in round stop, turn and taillight may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability....

Sealed, 4 in round stop, turn and taillight may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability. Features extra wide, spin-welded, tongue-and-groove lens lip and waterproof seal. High performance, copper alloy conductors eliminate the possibility of wire failure. State-of-the art bulb design features three supports for the minor filament and two supports for the major filament providing long bulb...

Red grommet mount kit. 9 to 16 V operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491...

Red grommet mount kit. 9 to 16 V operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491 connecting plug. Proudly made in the USA.Unit: CD

Submersible LED rear lighting kit for trailers under 80 in wide. Solid state super bright LED diodes, 100,000 hrs rated life. Includes 840/840L LED taillights plus license bracket, mounting hardware...

Submersible LED rear lighting kit for trailers under 80 in wide. Solid state super bright LED diodes, 100,000 hrs rated life. Includes 840/840L LED taillights plus license bracket, mounting hardware and installation instructions.Unit: CD

Submersible rear lighting kit and reflectors for all trailers 80 in wide and over. Includes 856/856L LED taillights plus license bracket, mounting hardware and installation instructions. 7-15/16 in...

Submersible rear lighting kit and reflectors for all trailers 80 in wide and over. Includes 856/856L LED taillights plus license bracket, mounting hardware and installation instructions. 7-15/16 in W x 2-7/8 in H x 2-7/8 in D.Unit: CD

Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12 ft coiled cord with cigarette lighter plug.Unit: CD

Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12 ft coiled cord with cigarette lighter plug.Unit: CD

Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and...

Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and vibration. Lower amp draw than incandescent lights. Designed to directly replace 456-Series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers 80 in wide and over. 7-15/16 in W x 2-7/8 in H x 2-7/8 in D.Unit: CD

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in...

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.Unit: EA

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: EA

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: EA

For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT...

For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces.Unit: EA

Features durable Lexan lens and nylon push-button On/Off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16 in W x 1-3/4 in H x 1-3/4 in D, mounts on...

Features durable Lexan lens and nylon push-button On/Off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16 in W x 1-3/4 in H x 1-3/4 in D, mounts on 3-1/2 in x 1-1/2 in centers.Unit: EA

Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9 to 16 V operating range. Available for grommet mount, flush-mount or...

Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9 to 16 V operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug.Unit: CD

Convex round distortion free glass mirror in a corrosion free aluminum housing for passenger car mounting. Gives wide angle view. Weather-resistant adhesive back.Unit: CD

Convex round distortion free glass mirror in a corrosion free aluminum housing for passenger car mounting. Gives wide angle view. Weather-resistant adhesive back.Unit: CD

Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3...

Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D.Unit: CD

Acrylic lens with adhesive backing easily mounts to any clean, flat surface. Contains 2 per card.Unit: EA

Acrylic lens with adhesive backing easily mounts to any clean, flat surface. Contains 2 per card.Unit: EA

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in...

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.Unit: CD

PM Trailer Connector, Vehicle End: 4-Way FlatUnit: CD

PM Trailer Connector, Vehicle End: 4-Way FlatUnit: CD

Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.Unit: CD ...

Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.Unit: CD

High-brightness reflective material rated at 1000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. Offers 4X greater reflectivity, wider viewing angles,...

High-brightness reflective material rated at 1000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. Offers 4X greater reflectivity, wider viewing angles, higher visibility at long range and tougher durability. Includes four 18 in long pre-cut strips of 2 in wide tape, 7 in white and 11 in red.Unit: CD

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens...

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.Unit: CD

Corrosion-resistant, zinc-plated, painted with white baked enamel. Three 3-1/4 in x 1 in x 1-1/8 in #107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to...

Corrosion-resistant, zinc-plated, painted with white baked enamel. Three 3-1/4 in x 1 in x 1-1/8 in #107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to protect against being knocked out. Mounts on 16-1/2 in centers and grounds through mounting hardware. 16-1/8 in W x 1 in H x 1-3/8 in D, 16-1/2 in L with mounting brackets.Unit: CD

Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D...

Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D overall.Unit: CD

Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for...

Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for electrical connection. Features 15,000 hr long life bulb.Unit: CD

Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs....

Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.Unit: EA

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: CD

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: CD