HALEX COMPANY

Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat.Unit: BX2

Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat.Unit: BX2

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided...

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL listed and CSA certified.Unit: BAG 2

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.Unit: BX 25

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.Unit: BX 25

Halex Clamp Connector, 3/4 in Trade, Zinc, 23/32 in Diameter Mounting Hole, 1-13/32 in Length, 15/16 in Width, 1-11/16 in Height, Suitable for: #14/2 Round, #12/3 to 8/3 AWG Non-Metallic Cable or...

Halex Clamp Connector, 3/4 in Trade, Zinc, 23/32 in Diameter Mounting Hole, 1-13/32 in Length, 15/16 in Width, 1-11/16 in Height, Suitable for: #14/2 Round, #12/3 to 8/3 AWG Non-Metallic Cable or 0.46 to 0.72 in Dia Flex CordUnit: BAG 5

Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway...

Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.Unit: EA

Halex Conduit Chase Nipple, 1/2 in Trade, Threaded Connection, Zinc, 0.68 in Length, 1.02 in ODUnit: BX100

Halex Conduit Chase Nipple, 1/2 in Trade, Threaded Connection, Zinc, 0.68 in Length, 1.02 in ODUnit: BX100

Use to connect S, SO, ST, SJ, SJO and SJT cord to a steel outlet box or other metal enclosure. UL approved and CSA certified.Unit: BAG 2

Use to connect S, SO, ST, SJ, SJO and SJT cord to a steel outlet box or other metal enclosure. UL approved and CSA certified.Unit: BAG 2

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.Unit: BX10

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.Unit: BX10

Steel, use to secure BX cable to wood, masonry or similar surface.Unit: BAG10

Steel, use to secure BX cable to wood, masonry or similar surface.Unit: BAG10

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA...

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.Unit: EA

Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.Unit: EA

Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.Unit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 1-3/4 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 1-3/4 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 1-3/4 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 1-3/4 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 2.18 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 2.18 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 2.18 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 2.18 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.37 in ID, 2.18 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.37 in ID, 2.18 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 2.44 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 2.44 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 2.44 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 2.44 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.37 in ID, 2.44 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.37 in ID, 2.44 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 3 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 0.87 in ID, 3 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.37 in ID, 3 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.37 in ID, 3 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.73 in ID, 3 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.73 in ID, 3 in OD, 0.0315 in ThicknessUnit: EA

Use to join two lengths of EMT conduit together. Zinc. UL, CSA approved.Unit: BAG 5

Use to join two lengths of EMT conduit together. Zinc. UL, CSA approved.Unit: BAG 5

Use to protect internal wire runs from nail punctures, as defined in the NEC Article 300-4.Unit: EA

Use to protect internal wire runs from nail punctures, as defined in the NEC Article 300-4.Unit: EA