Electric Hammer Drills

The DW505 1/2 in VSR dual range hammer drill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design for easy handling and...

The DW505 1/2 in VSR dual range hammer drill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design for easy handling and operating. 1/2 INCH - 7.8 AMP - VSRKEYEDUnit: EA

The DWD520K 1/2 in VSR pistol grip hammer drill kit can be set to either drill or hammer drill mode for applying to masonry, wood or steel. Includes a two-speed range for high-speed drilling or...

The DWD520K 1/2 in VSR pistol grip hammer drill kit can be set to either drill or hammer drill mode for applying to masonry, wood or steel. Includes a two-speed range for high-speed drilling or torqueing. Soft-grip handle and two-finger trigger increases user's comfort and control. 1/2 INCH - 10 AMP - VSRKEYEDUnit: EA

Single speed hammer drill. 7.0 amp motor provides high performance and overload protection. Dual mode: hammer drill/drill for wood, steel or masonry applications. Lightweight design for extended use...

Single speed hammer drill. 7.0 amp motor provides high performance and overload protection. Dual mode: hammer drill/drill for wood, steel or masonry applications. Lightweight design for extended use and less user fatigue weighs only 4.3 lbs. Two-finger, rubber trigger for user comfort. 360 degree side handle with depth rod offers greater control, versatility and increased depth accuracy. Variable speed allows for precise hole placement on work surface. Compact design (10.3" length) allows for...

Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service...

Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for continuous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case. 5/8 INCH-6 AMP-VSKEYLESSUnit: EA ...

The Makita 3/4 in hammer drill is powered by a 6.6 A motor that is engineered for the most demanding applications. The HP2050F features a torque-limiting clutch that disengages automatically if the...

The Makita 3/4 in hammer drill is powered by a 6.6 A motor that is engineered for the most demanding applications. The HP2050F features a torque-limiting clutch that disengages automatically if the bit binds and two-mode operation for hammering with rotation or hammering only. Additional features include less weight (only 5.6 lb), a large trigger switch and an ergonomic rubberized grip for increased comfort. The HP2050F also features an LED light for improved visibility and a variable speed...

The Makita HP2070F 3/4 in hammer drill has a powerful 8.2 A motor for the most demanding applications. It includes two-mode operation for rotation only or hammering with rotation for multiple...

The Makita HP2070F 3/4 in hammer drill has a powerful 8.2 A motor for the most demanding applications. It includes two-mode operation for rotation only or hammering with rotation for multiple applications. The hammer drill contains a conveniently located reverse slide switch for easy access and use and an ergonomic rubberized grip for increased comfort on the job. 3/4 INCH - 8.2 AMP -VSRKEYEDUnit: EA

Variable speed with 3-mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck,...

Variable speed with 3-mode operation rotation only, hammering with rotation and hammering only, ergonomic D-shaped handle with rubberized soft grip, accepts SDS-PLUS bits, one touch sliding chuck, built-in torque limiter, 'No hammering when idling' function, extended service life of carbon brushes, recessed lock on button, 40 different bit angle settings. Rated at 7 A, impact energy is 2.7 ft/lb, no load rating is 0 to 4500 bpm, no load rating is 0 to 1100 rpm, capacity of 1 in for concrete,...

The 1-1/2 in spline shank rotary hammer (DH38YE2) is the next generation in Metabo HPT hammer technology. Compared to its predecessor the DH38YE, the DH38YE2 packs power into a more ergonomic body...

The 1-1/2 in spline shank rotary hammer (DH38YE2) is the next generation in Metabo HPT hammer technology. Compared to its predecessor the DH38YE, the DH38YE2 packs power into a more ergonomic body that is 2.9 lb lighter, while delivering less vibration and a lower noise level. 1-1/2 INCH-8.4 AMPSPLINE-2 MODEUnit: EA

The DH40MC 1-9/16 in SDS Max rotary hammer is designed to take on a variety of tasks including drilling holes in a concrete for anchors or rebar, demolishing and chiseling concrete, cutting,...

The DH40MC 1-9/16 in SDS Max rotary hammer is designed to take on a variety of tasks including drilling holes in a concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. This powerful 10 A motor produces 6.3 ft-lb of impact energy and delivers top of class drilling speed. It's also easy and comfortable to use with an oversized knob that changes the mode from hammer drilling to hammer only and an oversized trigger that is easy-to-use...

Metabo HPT Rotary Hammer, Amp Rating: 11.3 A, Keyless, SDS-Max Chuck, 1-9/16 in Chuck, 2850 bpm Blows per Minute, 8.1 ft-lb Impact Energy, 500 rpm Speed, Includes: 1 oz Tube Hammer Grease, Depth...

Metabo HPT Rotary Hammer, Amp Rating: 11.3 A, Keyless, SDS-Max Chuck, 1-9/16 in Chuck, 2850 bpm Blows per Minute, 8.1 ft-lb Impact Energy, 500 rpm Speed, Includes: 1 oz Tube Hammer Grease, Depth Stopper Rod, Side Handle, Injection Molded Carrying Case, Soft-Grip Handle11.3 AMPS - BRUSHLESSSDS-MAX-VSUnit: EA

Metabo HPT 2-Modes Hammer Drill, Amp Rating: 6 A, 3-Jaw Keyed Chuck, 1/2 in Chuck, 0 to 46,400 bpm Blows per Minute, 0 to 2900 rpm Speed, Includes: 303659 Side Handle, 303709 Depth Stopper, 303334...

Metabo HPT 2-Modes Hammer Drill, Amp Rating: 6 A, 3-Jaw Keyed Chuck, 1/2 in Chuck, 0 to 46,400 bpm Blows per Minute, 0 to 2900 rpm Speed, Includes: 303659 Side Handle, 303709 Depth Stopper, 303334 Chuck Key, 315999 Case 5/8 INCH-6 AMP-VSRKEYEDUnit: EA

The 5/8 in hammer drill is ideal for light-duty drilling into brick, cement block, wood, metal and resin plate. This model also grinds, sands and polishes wood and metal. The tightens and removes...

The 5/8 in hammer drill is ideal for light-duty drilling into brick, cement block, wood, metal and resin plate. This model also grinds, sands and polishes wood and metal. The tightens and removes various types of screws. This drill is not recommended for mixing applications. 5/8 INCH- 5 AMP-VSRKEYEDUnit: EA