Account
My Items
OR
Need to make a change to an installed SharkBite PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC...
Need to make a change to an installed SharkBite PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.Unit: EA
SharkBite PEX barb drop ear elbows are used to transition from PEX, to NPT threaded pipe, such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for...
SharkBite PEX barb drop ear elbows are used to transition from PEX, to NPT threaded pipe, such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for securing to a surface, such as a stud or wall and they provide additional stability. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as...
Used to control the flow of water to household plumbing fixtures and appliances. Ideal for maintenance and repair without having to shut-off water to the entire home. Used where the water pipe...
Used to control the flow of water to household plumbing fixtures and appliances. Ideal for maintenance and repair without having to shut-off water to the entire home. Used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. Typically used on stub-outs coming out of the wall. Certified for use in potable water systems.Unit: EA
SharkBite female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can...
SharkBite female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.Unit: EA
Each brass push 90 deg elbow with drain/vent allows for water to be drained from the line if needed. Common applications include draining irrigation systems or hose bibs when winterizing. Compatible...
Each brass push 90 deg elbow with drain/vent allows for water to be drained from the line if needed. Common applications include draining irrigation systems or hose bibs when winterizing. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.Unit: EA
The SharkBite PEX barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass,...
The SharkBite PEX barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass, the SharkBite barb fittings are corrosion-resistant.Unit: BAG10
Transition between PEX pipe and an FNPT threaded connection with a crimp or clamp connection. Certified for use in potable water and hydronic heating systems.Unit: BAG10
When transitioning pipe size, there is no easier way than with SharkBite push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no...
When transitioning pipe size, there is no easier way than with SharkBite push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.Unit: EA
SharkBite Pipe Elbow, Nominal Size: 1/2 in, Angle: 45 deg, 200 psi, Operating Temperature: 200 deg F, BrassUnit: EA
The SharkBite PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a...
The SharkBite PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a male sweat connection that can be soldered.Unit: EA
SharkBite male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes...
SharkBite male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.Unit: EA
The reducer fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by...
The reducer fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. To install the reducer, simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and...
The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when...
The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component.Unit: EA
SharkBite Multi-Head Kit, Crimping Capacity: 3/8 to 1 in, Steel Blade, Handle Color: Orange, 22 in OAL, Includes: Orange HandleUnit: EA
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee...
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Size indicated is end x end x branch.Unit: EA
A one-piece connector design that combines a 1/2 in push-to-connect Supply Stop with a Click Seal faucet connector. Provides an audible click to ensure a secure connection and prevent...
A one-piece connector design that combines a 1/2 in push-to-connect Supply Stop with a Click Seal faucet connector. Provides an audible click to ensure a secure connection and prevent over-tightening.Unit: EA
The SharkBite PEX barb polybutylene adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect PEX tubing to polybutylene pipe. SharkBite PEX barb fittings are...
The SharkBite PEX barb polybutylene adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect PEX tubing to polybutylene pipe. SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. This product includes two-colors co-ordinated crimp rings the included black crimp ring is intended for PEX while the copper colored crimp ring is for use on polybutylene pipe.Unit: EA
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee...
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.Unit: EA
The SharkBite PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic...
The SharkBite PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well each sold separately.Unit: EA
The SharkBite PEX swivel adapter is an easy-to-install solution to connect PEX tubing to a male threaded connection. These fittings are suitable for potable water distribution and hydronic heating...
The SharkBite PEX swivel adapter is an easy-to-install solution to connect PEX tubing to a male threaded connection. These fittings are suitable for potable water distribution and hydronic heating applications. SharkBite PEX barb fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well (each sold separately).Unit: EA
The female center slip tee is the perfecting fitting to add an expansion tank for your water heater and other similar applications. The slip tee allows for the fitting to be connected to the pipe...
The female center slip tee is the perfecting fitting to add an expansion tank for your water heater and other similar applications. The slip tee allows for the fitting to be connected to the pipe and, using the disconnect clips, slipped back onto the other end of the pipe without the need for additional pipe or tubing. The FNPT branch is threaded so that you can directly connect the expansion tank after installing the tee to the line. This product is rated to 200 deg F and 200 psi and can be...
Slip fittings simplify repair by doing the job that two couplings and extra pipe used to do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe....
Slip fittings simplify repair by doing the job that two couplings and extra pipe used to do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair. Suitable for copper or CPVC only.Unit: EA