Account
My Items
OR
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee...
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.Unit: EA
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX...
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system.Unit: EA
A double-body strap water heater restraint kit for water heaters up to 80 gal in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8 in carriage bolts, (2) caps and...
A double-body strap water heater restraint kit for water heaters up to 80 gal in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8 in carriage bolts, (2) caps and (2) 3/8 in hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 ga CRS, galvanized material, with a protective non-scratch painted coating and protective safety cap. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los...
SharkBite Pipe Adapter, Nominal Size: 3/4 in, Barb x FNPT Connection, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, Brass, Suitable for: PEX TubingUnit: BAG5
The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply...
The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The coupler fitting ensures an easier working environment in...
The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis,...
The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers and many more. The valves are not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.Unit: EA
SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in...
SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in red and white colors. SharkBite PEX is approved for crimp, clamp or push-to-connect plumbing systems. The pipe comes with a repeating SharkBite imprinted pattern which serves as a visual aid to determine if the tube has been inserted correctly into SharkBite push-to-connect fittings. This feature...
Protects the valve from freezing conditions and from potential back pressure and contaminated water flowing back into the main line. Has an integrated 1/2 in push-to-connect inlet that is compatible...
Protects the valve from freezing conditions and from potential back pressure and contaminated water flowing back into the main line. Has an integrated 1/2 in push-to-connect inlet that is compatible with PEX, copper, CPVC, PE-RT and HDPE pipes and a 3/4 in garden hose outlet. The shut-off is located at the inlet of the sillcock to drain the water from the line to protect the valve in freezing conditions. Comes with an integrated vacuum breaker to prevent backflow and a mounting flange to...
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee...
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.Unit: EA
SharkBite Washing Machine Valve, Specifications: 33 to 200 deg F Working, 80 to 160 psi, Brass, Suitable for: PEX and PE-RT PipeUnit: EA
Transition between PEX pipe and an FNPT threaded connection with a crimp or clamp connection. Certified for use in potable water and hydronic heating systems.Unit: PK10
SharkBite end caps are push to connect and are the easiest way to cap off your copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great...
SharkBite end caps are push to connect and are the easiest way to cap off your copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a disconnect clip. All SharkBite fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.Unit: EA
The SharkBite PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing...
The SharkBite PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the...
Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: LGTH ...
Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: LGTH
The SharkBite stop valve connectors allow you to easily connect 1/4 in (3/8 in OD) copper tube sized pipe (CTS) to either a 1/4 or 3/8 in compression connection, which are primarily used for...
The SharkBite stop valve connectors allow you to easily connect 1/4 in (3/8 in OD) copper tube sized pipe (CTS) to either a 1/4 or 3/8 in compression connection, which are primarily used for refrigerators or ice makers. The push-to-connect connection is the fastest and easiest way to connect to copper, PEX, CPVC or PE-RT pipe and requires no soldering, clamps, unions or glue.Unit: EA
The SharkBite tee stop combines a SharkBite push-to-connect tee with a 1/4 in compression line and a quarter turn valve for easy on/off control of the supply line. This product is particularly...
The SharkBite tee stop combines a SharkBite push-to-connect tee with a 1/4 in compression line and a quarter turn valve for easy on/off control of the supply line. This product is particularly useful for adding supply lines to fixtures such as dishwashers, humidifiers and ice makers. The Tee Stop also commonly serves as an alternative to a saddle valve. It can be used on Copper, PEX, CPVC or PE-RT tubing. The valve is easily rotated after assembly for easy installation, even in tight...
The SharkBite PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a...
The SharkBite PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a male sweat connection that can be soldered.Unit: EA
Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: COIL ...
Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: COIL
SharkBite female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can...
SharkBite female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.Unit: EA
Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1...
Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.Unit: EA
PEX only push-fitting used to permanently transition between PEX pipe and an FNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods....
PEX only push-fitting used to permanently transition between PEX pipe and an FNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp or clamp or PEX rings, increasing productivity. Securely and permanently transition between PEX pipe and an FNPT thread. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.Unit: EA
The SharkBite PEX/barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass,...
The SharkBite PEX/barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass, the SharkBite barb fittings are corrosion-resistant. With a wide range of fittings, manifolds, valves, clamp rings, crimp rings, ball valves and tools available, the SharkBite PEX/barb connection system is perfect for your next plumbing project.Unit: BAG10
SharkBite male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes...
SharkBite male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.Unit: EA