Account
My Items
OR
For fast and safe installation of frame ties, heavy-duty 1/4 in steel hook locks securely onto frame. Certified galvanized steel strapping conforms to NCS BCS A225.1 (ANSI A119.3) and HUD...
For fast and safe installation of frame ties, heavy-duty 1/4 in steel hook locks securely onto frame. Certified galvanized steel strapping conforms to NCS BCS A225.1 (ANSI A119.3) and HUD specifications.Unit: EA
Engineered for installation in hard density soil. 3/4 in rod, twin 4 in helix.Unit: EA
Engineered for installation in light density soils. 5/8 in rod, 6 in helix.Unit: EA
Engineered for installation in medium dense coarse sands, sandy gravel, very stiff silts and clays. 3/4 in rod, 4 in and 6 in helix.Unit: EA
Designed to be bolted to an expansion sleeve in an existing concrete slab or footing with only a 5/8 in drilled hole for expansion anchor bolt. Concrete must be 2500 psi minimum slab with 4 in...
Designed to be bolted to an expansion sleeve in an existing concrete slab or footing with only a 5/8 in drilled hole for expansion anchor bolt. Concrete must be 2500 psi minimum slab with 4 in minimum thickness and 6/6 x 10/10 wire mesh or fiber mesh installed. Concrete slab must allow 4725 lb of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 lb/cu-ft. Minimum distance from the anchor shaft to one edge of the slab is 4 in from one edge and 6 in from any...
Designed to be installed into concrete slab at the time the concrete is poured. Concrete must be a 2500 psi minimum slab. Concrete slab must allow 4725 lb of vertical tension on anchor without...
Designed to be installed into concrete slab at the time the concrete is poured. Concrete must be a 2500 psi minimum slab. Concrete slab must allow 4725 lb of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 lb/cu-ft. Slab must be 8 in minimum thickness at location under any anchor to allow 5 in embedment of anchor J rod. Black color.Unit: EA
Standard or drive-in latch. Key to thumb. Fits doors 1-3/8 to 1-5/8 in thickness. 2-3/8 in setback. Bagged.Unit: EA
Used on front and rear entrance doors. Round drive-in latch locked from exterior by key, locked from interior by pushing handle in and turning clockwise. 2-3/8 in backset. Key included. Requires...
Used on front and rear entrance doors. Round drive-in latch locked from exterior by key, locked from interior by pushing handle in and turning clockwise. 2-3/8 in backset. Key included. Requires Philips head screwdriver for installation. Carded.Unit: EA
Imported 4 way universal entry lock. Standard or drive-in latch. Fits doors 1-3/8 to 1-5/8 in thickness. 2-3/8 in or 2-3/4 in setback. Carded.Unit: EA
Standard or drive-in latch. Fits doors 1-3/8 to 1-5/8 in thickness. 2-3/8 in setback. Key to thumb. Bagged.Unit: EA
Used in the installation of ceiling tile, mirrors and many other household fixtures. 1-1/8 in Dia. Screws included with white buttons have white heads, screws included with clear buttons have mill...
Used in the installation of ceiling tile, mirrors and many other household fixtures. 1-1/8 in Dia. Screws included with white buttons have white heads, screws included with clear buttons have mill finish heads. Bagged.Unit: PK 24