Rough Plumbing Supplies

Includes 2 convertible fittings and 4 hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4 in or 1-1/2 in OD pipe.Unit: EA ...

Includes 2 convertible fittings and 4 hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4 in or 1-1/2 in OD pipe.Unit: EA

1-1/2 in pump thread with 1-1/4 in or 1-1/2 in pipe connection.Unit: EA

1-1/2 in pump thread with 1-1/4 in or 1-1/2 in pipe connection.Unit: EA

For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 psi) and miscellaneous applications for gases and liquids which are not...

For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 psi) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4 in FNPTF connection 1 hp at 120/240 VAC, 1-, 2-, 3-phase. 1/4 hp at 32 VDC. Carded.Unit: EA

1/3 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks...

1/3 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron pump base. Fully submersible. 1/3 hp, max flow rate is 3800 gph at 0 ft 1-1/2 in. NPT discharge. For use in 11 in. diameter or larger sump basins, 9 in ON level and 4 in OFF level.Unit: EA

1/2 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and...

1/2 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron base. Fully submersible. 1/2 hp, max flow rate is 4200 gph at 0 ft 1-1/2 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level.Unit: EA

3/4 hp cast iron and stainless steel submersible sump pump. Assembled in the US with foreign and domestic parts. Top suction design eliminates air locks and clogging from debris in bottom of sump...

3/4 hp cast iron and stainless steel submersible sump pump. Assembled in the US with foreign and domestic parts. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Stainless steel motor housing and rugged, cast iron pump base. Fully submersible. 3/4 hp, max flow rate is 4600 gph at 0 ft 1-1/12 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level.Unit: EA

Wayne Jet Pump, 3/4 in Connection, NPT Connection, 120/240 V, 1 hp, 1056 gph, 30 to 50 psi, Motor Type: Oil-Filled, Split Phase, Maximum Head: 90 ft, Number of Stages: 1, Cast IronUnit: EA

Wayne Jet Pump, 3/4 in Connection, NPT Connection, 120/240 V, 1 hp, 1056 gph, 30 to 50 psi, Motor Type: Oil-Filled, Split Phase, Maximum Head: 90 ft, Number of Stages: 1, Cast IronUnit: EA

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A...

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank.Unit: EA

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A...

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank.Unit: EA

Wayne Battery Backup Sump Pump with Automatic Switch, 48 gpm, Maximum Lift Head: 15 ft, Outlet Connection Size: 1-1/2 in, 12 VDC, Cord Length: 8 ft, Impeller Material: Thermoplastic, Housing...

Wayne Battery Backup Sump Pump with Automatic Switch, 48 gpm, Maximum Lift Head: 15 ft, Outlet Connection Size: 1-1/2 in, 12 VDC, Cord Length: 8 ft, Impeller Material: Thermoplastic, Housing Material: Steel/Cast Iron, Installation Type: Submersible, Includes: Protective Battery CaseUnit: EA

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC1, 12 V transfer pump is convenient when normal power is not readily available. Typical...

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC1, 12 V transfer pump is convenient when normal power is not readily available. Typical applications include removing water from pool covers, clogged drains, stock tanks, water basins, boats, cisterns, etc.Unit: EA

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC2, 120 V transfer pump is great for household usage. Typical applications include removing...

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC2, 120 V transfer pump is great for household usage. Typical applications include removing water from waterbeds, clogged sinks, basements and more. Do not use PC2 in pool areas. The motors on both models PC1 and PC2 are non-submersible.Unit: EA