RACO

Ceiling fan box, 4 in octagon, 1 bottom 1/2 in TKO knockout. 2-1/8 in depth, 22.3 cu-in. Used in new work and renovations. Features FA bracket for wood studs or joists, which allows box to be...

Ceiling fan box, 4 in octagon, 1 bottom 1/2 in TKO knockout. 2-1/8 in depth, 22.3 cu-in. Used in new work and renovations. Features FA bracket for wood studs or joists, which allows box to be securely mounted flush. Ceiling fan rated, can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 lb, for fixtures is 150 lb. Includes non-metallic sheathed cable connector, mounting hardware, high-strength hardened screws and instructions....

Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic...

Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic sheathed cable clamps. Acceptable for use in 2 hrs fire rated walls. Four cable knockouts (end). Two 1/2 in conduit knockouts (end). 1/2 in conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work. 2-1/4 in D. 10.5 cu-in. UL listed.Unit: EA

Used to add additional wiring capacity to handy box. Six 1/2 in knockouts (sides). Two 1/2 in knockouts (end). 4 in x 2 in x 1-1/2 in D. 11.5 cu-in. UL, CSA Listed.Unit: EA

Used to add additional wiring capacity to handy box. Six 1/2 in knockouts (sides). Two 1/2 in knockouts (end). 4 in x 2 in x 1-1/2 in D. 11.5 cu-in. UL, CSA Listed.Unit: EA

Raco Box Cover, Number of Gangs: 1, Steel, Gray, 0.49 in L, 2.31 in W, 4.18 in H, Includes: 1/2 in Center KnockoutUnit: EA

Raco Box Cover, Number of Gangs: 1, Steel, Gray, 0.49 in L, 2.31 in W, 4.18 in H, Includes: 1/2 in Center KnockoutUnit: EA

Conduit wiring system. Two 1/2 in and twelve TKO conduit knockouts (sides). One 1/2 in, three TKO conduit knockouts (bottom). No bracket, installed in ceilings or walls for lighting fixtures or...

Conduit wiring system. Two 1/2 in and twelve TKO conduit knockouts (sides). One 1/2 in, three TKO conduit knockouts (bottom). No bracket, installed in ceilings or walls for lighting fixtures or receptacles. 4-11/16 in square x 2-1/8 in deep, 42 cu-in. Combination cover screw heads provide for faster mud ring/cover installation. UPC bar code. UL listed.Unit: EA

Round duplex receptacle floor box. Duplex cover with lift lids, 2-1/2 in bottom knockout, 18.5 cu-in capacity. Cast iron construction with gray powder coat finish for corrosion resistance. Suitable...

Round duplex receptacle floor box. Duplex cover with lift lids, 2-1/2 in bottom knockout, 18.5 cu-in capacity. Cast iron construction with gray powder coat finish for corrosion resistance. Suitable for carpet, tile or wood floor applications. Mop water tight. If floor covering is used, discard included brass tile flange and replace with Raco 6235 carpet flange. Includes box, brass duplex lift lid cover and brass tile flange. Receptacle not included. UL listed. 4.19 in Dia.Unit: EA

For adding additional cubic capacity or as an outlet box for surface conduit. Twelve 1/2 in side knockouts, drawn metal, suitable for use in 2 hrs fire rated walls. 4 in square x 1-1/2 in D, 22.5...

For adding additional cubic capacity or as an outlet box for surface conduit. Twelve 1/2 in side knockouts, drawn metal, suitable for use in 2 hrs fire rated walls. 4 in square x 1-1/2 in D, 22.5 cu-in capacity. UL listed.Unit: EA

Raco Octagonal Box, Number of Knockouts: 8, Cable Entry: Knockout, Cubic Capacity: 15.5 cu-in, Housing Material: Steel, 4 in OAW, Overall Depth: 1-1/2 in, 7 in OAH, Bracket Mounting, Suitable for:...

Raco Octagonal Box, Number of Knockouts: 8, Cable Entry: Knockout, Cubic Capacity: 15.5 cu-in, Housing Material: Steel, 4 in OAW, Overall Depth: 1-1/2 in, 7 in OAH, Bracket Mounting, Suitable for: Ceiling or Wall Lighting FixtureUnit: EA

For two receptacles. Two 1-13/32 Dia holes. 6.5 cu-in capacity. UL and CSA listed.Unit: EA

For two receptacles. Two 1-13/32 Dia holes. 6.5 cu-in capacity. UL and CSA listed.Unit: EA

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Number of Gangs: 4, Cubic Capacity: 63.5 cu-in, Dimensions: 7-5/8 in H x 7-5/8 in W x 2-1/2 in D, Steel,...

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Number of Gangs: 4, Cubic Capacity: 63.5 cu-in, Dimensions: 7-5/8 in H x 7-5/8 in W x 2-1/2 in D, Steel, Gray, Bracket Mounting, Suitable for: SwitchUnit: EA

Raco Box Cover, Square, Number of Gangs: 1, Steel, Gray, 0.063 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, ReceptacleUnit: EA

Raco Box Cover, Square, Number of Gangs: 1, Steel, Gray, 0.063 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, ReceptacleUnit: EA

Raco Electrical Box Cover, Octagonal, Number of Gangs: 1, Steel, Galvanized, 0.063 in L, 3.63 in W, 3.63 in HUnit: EA

Raco Electrical Box Cover, Octagonal, Number of Gangs: 1, Steel, Galvanized, 0.063 in L, 3.63 in W, 3.63 in HUnit: EA

Add-A-Depth ring or "goof ring" is designed to act as a barrier between combustible wall surfaces and the wiring system. This product can be used for single or two-gang device boxes that are set too...

Add-A-Depth ring or "goof ring" is designed to act as a barrier between combustible wall surfaces and the wiring system. This product can be used for single or two-gang device boxes that are set too deep in the wall.Unit: EA

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Number of Gangs: 2, Square, Cubic Capacity: 30.3 cu-in, Dimensions: 4 in W x 2-1/8 in D x 4 in H, Steel,...

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Number of Gangs: 2, Square, Cubic Capacity: 30.3 cu-in, Dimensions: 4 in W x 2-1/8 in D x 4 in H, Steel, Gray, Galvanized, FM Bracket MountingUnit: EA

Raised 1/2 in. Used to support switches or receptacles independent of the box (box must still be used). 6.5 cu-in. UL listed.Unit: EA

Raised 1/2 in. Used to support switches or receptacles independent of the box (box must still be used). 6.5 cu-in. UL listed.Unit: EA

Raco Box Cover, Square, Number of Gangs: 1, Steel, Gray, 5/8 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, 1.719 in Dia Receptacle, Includes: HardwareUnit: EA

Raco Box Cover, Square, Number of Gangs: 1, Steel, Gray, 5/8 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, 1.719 in Dia Receptacle, Includes: HardwareUnit: EA

For grounding switch and outlet boxes using non-metallic sheathed cables from #14 to 10.Unit: EA

For grounding switch and outlet boxes using non-metallic sheathed cables from #14 to 10.Unit: EA

Orbit Industries' handy boxes and extension rings mount on the surface of the wall and are used in the installation of switches, receptacles and other electrical devices. They are constructed from...

Orbit Industries' handy boxes and extension rings mount on the surface of the wall and are used in the installation of switches, receptacles and other electrical devices. They are constructed from 16 ga galvanized steel. The welded, 1-7/8 in deep boxes include 1/2 in knockouts. Selected models include an FB bracket to mount on the flat side of the stud and an AB bracket to mount on the face and side of the stud.Unit: EA

Four cable knockouts (end). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Adjustable plaster ears allow box to be used in...

Four cable knockouts (end). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2 hrs rated fire walls.Unit: EA

Raco Box Cover, Number of Gangs: 1, Steel, Galvanized, Gray, 0.49 in L, 2.313 in W, 4.188 in H, Threaded MountingUnit: EA

Raco Box Cover, Number of Gangs: 1, Steel, Galvanized, Gray, 0.49 in L, 2.313 in W, 4.188 in H, Threaded MountingUnit: EA

Orbit Industries round covers are used to cover protect wires. It is constructed from 16 ga galvanized steel. Orbit's selection includes variety types of covers for many devices.Unit: EA

Orbit Industries round covers are used to cover protect wires. It is constructed from 16 ga galvanized steel. Orbit's selection includes variety types of covers for many devices.Unit: EA

Welded design allows for more working room inside box. Six 1/2 in knockouts (sides). Two 1/2 in knockouts (ends). Three 1/2 in knockouts (bottom). Acceptable for use in 2 hrs rated walls. UL...

Welded design allows for more working room inside box. Six 1/2 in knockouts (sides). Two 1/2 in knockouts (ends). Three 1/2 in knockouts (bottom). Acceptable for use in 2 hrs rated walls. UL listed.Unit: EA

For one duplex receptacle. Raised 1/2 in. 6-1/2 cu-in capacity. 4 in square. UL listed.Unit: EA

For one duplex receptacle. Raised 1/2 in. 6-1/2 cu-in capacity. 4 in square. UL listed.Unit: EA

Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With armored cable/metal clad/flex clamps. "LB" bracket for wood studs, with 5/8 in setback, no...

Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With armored cable/metal clad/flex clamps. "LB" bracket for wood studs, with 5/8 in setback, no plaster ears. Acceptable for use in 2 hrs rated walls. 2-1/2 in D. 12.5 cu-in. UL 514-A listed, File E195978. UPC bar coded.Unit: EA