NORTON

Fabric-backed foam for sanding a variety of materials. Coated 1 side.3" x 4" x 1/2" - BulkGrit=100ECONOMY - FLEXIBLEUnit: EA

Fabric-backed foam for sanding a variety of materials. Coated 1 side.3" x 4" x 1/2" - BulkGrit=100ECONOMY - FLEXIBLEUnit: EA

For metal fabrication, blending welds, cleaning, stripping and finishing. Built-in angle for grinding. Phenolic resin backing plate."20X"4-1/2" - 5/8" - 11 Hub - Handy PacksGrit=40ZIRCONIA -...

For metal fabrication, blending welds, cleaning, stripping and finishing. Built-in angle for grinding. Phenolic resin backing plate."20X"4-1/2" - 5/8" - 11 Hub - Handy PacksGrit=40ZIRCONIA - ABRASIVE CLOTHHIGH PERFORMANCEUnit: EA

For sanding wood, metal, plastic and fiberglass, as well as removing old paint."MULTISAND"9" x 11" - Job PacksGrit=P120CGENERAL PURPOSEUnit: PK 25 ...

For sanding wood, metal, plastic and fiberglass, as well as removing old paint."MULTISAND"9" x 11" - Job PacksGrit=P120CGENERAL PURPOSEUnit: PK 25

For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood."3X"Job Packs4" x...

For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood."3X"Job Packs4" x 24"Grit=50ZIRCONIA ALUMINAHIGH PERFORMANCEUnit: PK 5

Thin flexible pads allow you to sand areas that are rounded or contoured such as spindles, railings, casing and baseboards."PROSAND"4-1/2" x 5-1/2" x 3/16"Grit=120CONTOURUnit: PK 2 ...

Thin flexible pads allow you to sand areas that are rounded or contoured such as spindles, railings, casing and baseboards."PROSAND"4-1/2" x 5-1/2" x 3/16"Grit=120CONTOURUnit: PK 2

For sanding wood, metal, plastic and fiberglass, as well as removing old paint."MULTISAND"9" x 11" - Job PacksGrit=P36DGENERAL PURPOSEUnit: PK25 ...

For sanding wood, metal, plastic and fiberglass, as well as removing old paint."MULTISAND"9" x 11" - Job PacksGrit=P36DGENERAL PURPOSEUnit: PK25

Extra firm sponge with angled sides for sanding inside corners of drywall compound. Coated 4 sides."WALLSAND"4-7/8" x 2-7/8" x 1"Grit=Fine/MediumDUAL ANGLEUnit: EA ...

Extra firm sponge with angled sides for sanding inside corners of drywall compound. Coated 4 sides."WALLSAND"4-7/8" x 2-7/8" x 1"Grit=Fine/MediumDUAL ANGLEUnit: EA

Sand soft materials with this ProSand A975 fine grit paper hook and loop vacuum disc. With a fiber-reinforced, flexible B-weight latex-saturated backing and P-graded seeded-gel ceramic alumina...

Sand soft materials with this ProSand A975 fine grit paper hook and loop vacuum disc. With a fiber-reinforced, flexible B-weight latex-saturated backing and P-graded seeded-gel ceramic alumina abrasive coating, this fine paper disc delivers fast, consistent cuts and a long life with reduced tearing risk. Ideal for soft, high-loading materials, this vacuum disk uses a water-based non-pigmented no-fil coating to reduce surface loading while the vacuum holes whisk away fine dust. Attach this...

For small area paint and drywall repair. Firm sponge material with ultra sharp grain."PROSAND"4-1/2" x 2-11/16"Grit=60 Unit: PK 2

For small area paint and drywall repair. Firm sponge material with ultra sharp grain."PROSAND"4-1/2" x 2-11/16"Grit=60 Unit: PK 2

For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped...

For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets.3" x 7"Grit=120HOOK & LOOPUnit: PK 5

"For traditional cut-off applications. Type 1 center. 1/16"" blade thickness.""GEMINI"3/8" ARBORDia In=3Max RPM=25,465ALUMINUM OXIDE - METALUnit: EA ...

"For traditional cut-off applications. Type 1 center. 1/16"" blade thickness.""GEMINI"3/8" ARBORDia In=3Max RPM=25,465ALUMINUM OXIDE - METALUnit: EA

For use on all bench and pedestal mounted grinders. 1 in blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.1"...

For use on all bench and pedestal mounted grinders. 1 in blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.1" ROUND ARBORCoarse GritDia In=6Max RPM=4,140STRAIGHTALUMINUM OXIDE - METALUnit: CD

For dry sanding hardwood, metal and composites by hand or machine. Open coated on high tensile paper. Adalox A211 (D-wt), A212 (A-wt), A213 (C-wt) paper.9" x 11" Bulk - UPC Bar CodedGrit=P80D Unit:...

For dry sanding hardwood, metal and composites by hand or machine. Open coated on high tensile paper. Adalox A211 (D-wt), A212 (A-wt), A213 (C-wt) paper.9" x 11" Bulk - UPC Bar CodedGrit=P80D Unit: EA

Ideal sanding performance for a premium surface finish on all surfaces and coatings. Will not clog, tear or transfer. Heat treated aluminum oxide abrasive, P-graded for longer life and faster cut...

Ideal sanding performance for a premium surface finish on all surfaces and coatings. Will not clog, tear or transfer. Heat treated aluminum oxide abrasive, P-graded for longer life and faster cut rate. Consistent surface finish. Flexible, fibre reinforcedbacking. Non-pigmented, waterbased stearate (anti-clog) coating, open coat. No color dye in coating process, so no chance of color transfer to work surface. No finish contamination."PROSAND"4-1/2'' x 4-1/2'' Handy PacksGrit=P60HIGH...

Featuring P-graded aluminum oxide that reliably delivers a fast cut rate and a consistent finish, this A290 medium grit paper PSA vacuum disc roll is ideal for practically all materials, including...

Featuring P-graded aluminum oxide that reliably delivers a fast cut rate and a consistent finish, this A290 medium grit paper PSA vacuum disc roll is ideal for practically all materials, including soft metals, drywall, fiberglass, carbon steels of all kinds, wood, super alloys and drywall. Latex-saturated C-weight backing is reinforced with fiber, keeping its flexibility while resisting tears. Water-based stearate No-Fil protects against loading, while vacuum holes suck away dust. The linked...

Perform consistent, stable and fast cuts with the masonry C SC-type 01/41 circular saw cut-off wheel, featuring a coarse silicon carbide abrasive blend. Full fiberglass reinforcement construction...

Perform consistent, stable and fast cuts with the masonry C SC-type 01/41 circular saw cut-off wheel, featuring a coarse silicon carbide abrasive blend. Full fiberglass reinforcement construction gives this wheel a long life while cutting through a variety of masonry materials such as brick, concrete and asphalt. The wheel is compatible with all major circular saw brands due to a universal diamond -mount pop-out and a standard 5/8 in center hole.DM-5/8" ARBORHandy PacksDia In=8Max...

Use this Metalite R215/R255 medium grit cloth portable belt for medium grit applications when initial price is the main purchasing consideration. A strong butt joint lets the belt run in either...

Use this Metalite R215/R255 medium grit cloth portable belt for medium grit applications when initial price is the main purchasing consideration. A strong butt joint lets the belt run in either direction, while the premium aluminum oxide abrasive provides a fast initial cut rate ideal for stainless and carbon steel. The abrasive is backed by heavy X-weight cotton that provides durability and makes the belt a good choice for heat-sensitive tasks."3X"Handy Packs3" x 21"Grit=80ALUMINUM OXIDEUnit:...

Use on all surfaces and coatings. Will not clog, tear or transfer color. Premium heat-treated aluminum oxide abrasive, P-graded. Flexible, fibre-reinforced backing. Non-pigmented, water-based...

Use on all surfaces and coatings. Will not clog, tear or transfer color. Premium heat-treated aluminum oxide abrasive, P-graded. Flexible, fibre-reinforced backing. Non-pigmented, water-based stearate coating, open coat. No color dye in coating process."PROSAND"9" x 11" - Job PacksGrit=P400HIGH PERFORMANCEUnit: PK 20

For general purpose sanding where flexibility and tear-resistance are most important. Cloth backing provides increased strength and durability. For hand strapping, blending machine tool marks, light...

For general purpose sanding where flexibility and tear-resistance are most important. Cloth backing provides increased strength and durability. For hand strapping, blending machine tool marks, light deburring, and cleaning pipe & tubing.1-1/2" x 50 YdsGrit=P80-JALUMINUM OXIDEUnit: EA

Sand soft materials with this ProSand A975 fine grit paper hook and loop vacuum disc. With a fiber-reinforced, flexible B-weight latex-saturated backing and P-graded seeded-gel ceramic alumina...

Sand soft materials with this ProSand A975 fine grit paper hook and loop vacuum disc. With a fiber-reinforced, flexible B-weight latex-saturated backing and P-graded seeded-gel ceramic alumina abrasive coating, this fine paper disc delivers fast, consistent cuts and a long life with reduced tearing risk. Ideal for soft, high-loading materials, this vacuum disk uses a water-based non-pigmented no-fil coating to reduce surface loading while the vacuum holes whisk away fine dust. Attach this...

Use for paint stripping, light deburring and finishing, weld grinding and blending and heavy metal removal.5" x 7/8" - Bulk - UPC Bar CodedGrit=80ALUMINUM OXIDEMETALITE F226Unit: EA ...

Use for paint stripping, light deburring and finishing, weld grinding and blending and heavy metal removal.5" x 7/8" - Bulk - UPC Bar CodedGrit=80ALUMINUM OXIDEMETALITE F226Unit: EA

For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood."3X"Job Packs4" x...

For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood."3X"Job Packs4" x 24"Grit=120ZIRCONIA ALUMINAHIGH PERFORMANCEUnit: PK 5

For light removal, finish sanding, and cleaning of bare surface. Non-pigmented, water-based stearate (anti-clog) coating. Pressure sensitive adhesive allowing for quick and easy disc change."STICK &...

For light removal, finish sanding, and cleaning of bare surface. Non-pigmented, water-based stearate (anti-clog) coating. Pressure sensitive adhesive allowing for quick and easy disc change."STICK & SAND"5" Diameter - No Hole - Handy PacksGrit=40ADHESIVE BACKALUMINUM OXIDEUnit: PK 4

For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood."3X"Job Packs3" x...

For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood."3X"Job Packs3" x 18"Grit=120ZIRCONIA ALUMINAHIGH PERFORMANCEUnit: PK 5