J-M MFG. CO., INC.

Charlotte Pipe Pipe, Plain End, Nominal Size: 1-1/2 in, 1.9 in Dia Outside, Wall Thickness: 0.145 in, 20 ft L, Operating Temperature: SCHEDULE 40 - PLAIN ENDS20' LengthsI.D. Ins.=1-1/2PSI=330COLD...

Charlotte Pipe Pipe, Plain End, Nominal Size: 1-1/2 in, 1.9 in Dia Outside, Wall Thickness: 0.145 in, 20 ft L, Operating Temperature: SCHEDULE 40 - PLAIN ENDS20' LengthsI.D. Ins.=1-1/2PSI=330COLD WATER USE ONLY!DUAL MARKED FOR DWV & PRESSUREORDER BY LENGTHUnit: LGTH

Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes....

Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.SDR 21 - PLAIN ENDS10' LengthsI.D. Ins.=1-1/4COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for...

JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 200 psi, Schedule Rating: SCH 21, PVCSDR 21 - 1 BELLED END20' LengthsI.D. Ins.=3/4COLD WATER USE ONLY!ORDER BY LENGTHUnit:...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 200 psi, Schedule Rating: SCH 21, PVCSDR 21 - 1 BELLED END20' LengthsI.D. Ins.=3/4COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 10 ft L, 480 psi, Schedule Rating: SCH 40, PVCSCHEDULE 40 - PLAIN ENDS10' LengthsI.D. Ins.=3/4COLD WATER USE ONLY!ORDER BY...

Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 10 ft L, 480 psi, Schedule Rating: SCH 40, PVCSCHEDULE 40 - PLAIN ENDS10' LengthsI.D. Ins.=3/4COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 1-1/20 in Dia Outside, 10 ft L, 200 psi, Schedule Rating: SDR 21, PVC, WhiteSDR 21 - PLAIN ENDS10' LengthsI.D. Ins.=3/4COLD WATER...

Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 1-1/20 in Dia Outside, 10 ft L, 200 psi, Schedule Rating: SDR 21, PVC, WhiteSDR 21 - PLAIN ENDS10' LengthsI.D. Ins.=3/4COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

JM Eagle's wide line of solvent weld pipe includes PVC Schedule 30 and 40 in solid wall and Schedule 40 in cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint...

JM Eagle's wide line of solvent weld pipe includes PVC Schedule 30 and 40 in solid wall and Schedule 40 in cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, Schedule 30 pipe is available in 3-1/4 in Dia, and Schedule 40 is available in 1/2 in through 16 in Dia. Schedule 40 cellular core is available in 1-1/2 in through 12 in Dia. DWV pipe comes in 10 ft and 20 ft lengths in plain and bell end.SCHEDULE 40 - PLAIN ENDS20'...

JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR...

JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in...

JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for...

JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet...

Charlotte Pipe Pipe, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 20 ft L, 280 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, WhiteSCHEDULE 40 -...

Charlotte Pipe Pipe, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 20 ft L, 280 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, WhiteSCHEDULE 40 - PLAIN ENDS20' LengthsI.D. Ins.=2PSI=280COLD WATER USE ONLY!DUAL MARKED FOR DWV & PRESSUREORDER BY LENGTHUnit: LGTH

Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 1/2 in, 10 ft L, 600 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, WhiteSCHEDULE 40 - PLAIN ENDS10' LengthsI.D....

Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 1/2 in, 10 ft L, 600 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, WhiteSCHEDULE 40 - PLAIN ENDS10' LengthsI.D. Ins.=1/2COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

Charlotte Pipe Pipe, Plain End, Solid Wall, 1 in Nominal, 10 ft Length, 450 psi Pressure, SCH 40 Schedule, PVCSCHEDULE 40 - PLAIN ENDS10' LengthsI.D. Ins.=1COLD WATER USE ONLY!ORDER BY LENGTHUnit:...

Charlotte Pipe Pipe, Plain End, Solid Wall, 1 in Nominal, 10 ft Length, 450 psi Pressure, SCH 40 Schedule, PVCSCHEDULE 40 - PLAIN ENDS10' LengthsI.D. Ins.=1COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR...

JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3 in, 20 ft L, 260 psi, Schedule Rating: SCH 40, PVCSCHEDULE 40 - 1 BELLED END20' LengthsI.D. Ins.=3PSI=260COLD WATER USE ONLY!DUAL MARKED...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3 in, 20 ft L, 260 psi, Schedule Rating: SCH 40, PVCSCHEDULE 40 - 1 BELLED END20' LengthsI.D. Ins.=3PSI=260COLD WATER USE ONLY!DUAL MARKED FOR DWV & PRESSUREORDER BY LENGTHUnit: LGTH

Charlotte Pipe ABS Plus Pipe, Foam Core, Plain End, Nominal Size: 3 in, 3-1/2 in Dia Outside, Wall Thickness: 0.216 in, 10 ft L, DWV Connection, Schedule Rating: SCH 40, ABS, BlackSCHEDULE 40 -...

Charlotte Pipe ABS Plus Pipe, Foam Core, Plain End, Nominal Size: 3 in, 3-1/2 in Dia Outside, Wall Thickness: 0.216 in, 10 ft L, DWV Connection, Schedule Rating: SCH 40, ABS, BlackSCHEDULE 40 - PLAIN ENDS10' LengthsDia In=3CELLULAR COREDRAIN-WASTE-VENT ONLY!ORDER BY LENGTHUnit: LGTH

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 10 ft L, Schedule Rating: SCH 35, PVC, GreenSDR35 - 1 BELLED ENDGreen Color-Coded - 10' LengthsI.D. Ins.=4HEAVY WALL - SOLIDORDER BY...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 10 ft L, Schedule Rating: SCH 35, PVC, GreenSDR35 - 1 BELLED ENDGreen Color-Coded - 10' LengthsI.D. Ins.=4HEAVY WALL - SOLIDORDER BY LENGTHUnit: LGTH

Charlotte Pipe Sewer and Drain Pipe, Bell End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.113 in, 20 ft L, 200 psi, Schedule Rating: SCH 40, SDR 21, PVCSDR 21 - 1 BELLED END20'...

Charlotte Pipe Sewer and Drain Pipe, Bell End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.113 in, 20 ft L, 200 psi, Schedule Rating: SCH 40, SDR 21, PVCSDR 21 - 1 BELLED END20' LengthsI.D. Ins.=2COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint...

JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end.SCHEDULE 40 - PLAIN ENDS10' LengthsI.D....

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 20 ft L, 450 psi, Schedule Rating: SCH 40, PVCSCHEDULE 40 - 1 BELLED END20' LengthsI.D. Ins.=1COLD WATER USE ONLY!ORDER BY LENGTHUnit:...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 20 ft L, 450 psi, Schedule Rating: SCH 40, PVCSCHEDULE 40 - 1 BELLED END20' LengthsI.D. Ins.=1COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are...

JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection.SCHEDULE 40 - PLAIN ENDS10' LengthsDia In=4CELLULAR COREDRAIN-WASTE-VENT ONLY!ORDER BY LENGTHUnit: LGTH

Charlotte Pipe Pipe, Type 1, Plain End, Solid Wall, Nominal Size: 1 in, 20 ft L, 630 psi, Schedule Rating: SCH 80, PVC, GraySCHEDULE 80 - PLAIN ENDS20' LengthsI.D. Ins.=1COLD WATER USE ONLY!ORDER BY...

Charlotte Pipe Pipe, Type 1, Plain End, Solid Wall, Nominal Size: 1 in, 20 ft L, 630 psi, Schedule Rating: SCH 80, PVC, GraySCHEDULE 80 - PLAIN ENDS20' LengthsI.D. Ins.=1COLD WATER USE ONLY!ORDER BY LENGTHUnit: LGTH

JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint...

JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end.SCHEDULE 40 - PLAIN ENDS10' LengthsI.D....

Charlotte Pipe Pipe, Nominal Size: 4 in, 4-1/2 in Dia Outside, Wall Thickness: 0.237 in, 20 ft L, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, WhiteSCHEDULE 40 - PLAIN...

Charlotte Pipe Pipe, Nominal Size: 4 in, 4-1/2 in Dia Outside, Wall Thickness: 0.237 in, 20 ft L, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, WhiteSCHEDULE 40 - PLAIN ENDS20' LengthsI.D. Ins.=4CELLULAR COREDRAIN-WASTE-VENT ONLY!ORDER BY LENGTHUnit: LGTH

Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system...

Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).SCHEDULE 40 - PLAIN ENDS20' LengthsI.D. Ins.=6PSI=180COLD WATER USE ONLY!DUAL MARKED FOR DWV & PRESSUREORDER BY...