OSI 1810374 Roof Tile Adhesive, Thick Paste, Acetone, Gray, 10 oz Cartridge

For the repair and installation of concrete, clay, slate or compOSIte type roof tiles on existing roofs. Bonds to most building materials producing a water and weather-resistant seal against the elements. Withstands high temperature roof exposure while maintaining its high tensile and shear strength. Easy to use with all "S" type tile and flat type tile applications. Do not use on tar/asphalt impregnated materials. 20 mins at 70 deg F, 50% RH open time, 24 hrs cure time, -20 to 180 deg F service temperature. Mineral spirits or paint thinner, clean up. 1/4 in bead covers approximate 32 linear ft and a 3/8 in bead covers approximate 14 linear ft.

Unit: EA

• Applicable Materials: Clay Quarry Slate
• Base Type: Resin Synthetic Rubber
• Boiling Point: 56 to 57 deg C
• Color: Gray
• Compositions: Limestone Kaolin Acetone Pentaerythritol Ester of Rosin Methyl Acetate Quartz (SiO2)
• Container Type: Cartridge
• Coverage Area: 30.6 ft
• Density: 2
• Drying Time: 15 min
• Flammability Rating: 2
• Flash Point: 1.4 deg F
• Form: Thick Paste
• Media: Carbon Dioxide Dry Chemical Foam Water Fog
• Net Content: 10 oz
• Odor/Scent: Acetone
• pH Range: 7
• Resists: Water Weathering
• Setting Time: 30 min
• Specific Gravity: 1.44
• Temperature Rating: -20 to 150 deg F
• Viscosity: 375000 mPa-s
• VOC Content: 5.67 g/L

MPN: 1810374 - UPC: 028756967989