FLAIR-IT

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone...

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK™ part numbers come retail bagged fitting plus rings.Unit: EA

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK clamp, anyone can...

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK part numbers come retail bagged fitting plus rings.Unit: EA

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With white markings. Bar coded.Unit: EA ...

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With white markings. Bar coded.Unit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.Unit: EA

Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA

Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA

Flair-It Specialty Wrench, 1/2 x 3/4 in, PlasticUnit: EA

Flair-It Specialty Wrench, 1/2 x 3/4 in, PlasticUnit: EA

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending.Unit: EA

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA ...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.Unit: EA

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone...

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK™ part numbers come retail bagged fitting plus rings.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.Unit: EA

Use to install shut-off in straight pipe run. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,...

Use to install shut-off in straight pipe run. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi patent pending.Unit: EA

Use to bypass flow for water heaters and softeners. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,...

Use to bypass flow for water heaters and softeners. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi patent pending.Unit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.Unit: EA

Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent Pending.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.Unit: EA

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone...

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK™ part numbers come retail bagged fitting plus rings.Unit: EA

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded.Unit:...

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded.Unit: EA

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression.Unit: EA

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi approved for behind the wall and underground applications. Patent pending.Unit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA ...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA ...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA ...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA