B & K INDUSTRIES

200 psi WOG, -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 psia, IAPMO listed to CUPC, certified to NSF...

200 psi WOG, -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 psia, IAPMO listed to CUPC, certified to NSF 61-G.Size In=1/2PSI=200LEAD FREE BRASSCOMP X COMPUnit: EA

Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air...

Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.LONG LEVER HANDLEFIP Inches=1-1/4LEVER HANDLE - FIP X FIPQUARTER...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1/26" CLAMPTWO BOLTSUnit: EA ...

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1/26" CLAMPTWO BOLTSUnit: EA

Spring loaded poppet, O-ring seal.IPS In=1-1/2BARONZEIN-LINEUnit: EA

Spring loaded poppet, O-ring seal.IPS In=1-1/2BARONZEIN-LINEUnit: EA

Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. Specification, solder ends comply with ANSI B16.18, certified to...

Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. Specification, solder ends comply with ANSI B16.18, certified to NSF 61-G.PROFPT In=1PSI=300LEAD FREE BRASSFPT x FPTUnit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.IPS...

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.IPS In=1-1/4IPSSCHEDULE 80Unit: EA

Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.LEAD FREEFPT x FPT...

Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.LEAD FREEFPT x FPT In=3/4PSI=125FIP X FIPLEAD FREE BRASSUnit: EA

B & K Radiator Steam Vent, Straight, Brass, Dimensions: 1/8 inSize In=1/8STRAIGHTUnit: EA

B & K Radiator Steam Vent, Straight, Brass, Dimensions: 1/8 inSize In=1/8STRAIGHTUnit: EA

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.LEAD FREEFIP In=1PSI=200BRASS - STANDARDFIP X FIPUnit: EA ...

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.LEAD FREEFIP In=1PSI=200BRASS - STANDARDFIP X FIPUnit: EA

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily...

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.PC x FNPT In=1/2 x 1/2DROP EAR ELBOWLEAD FREE BRASSUnit: EA

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1-1/26" CLAMPTWO BOLTSUnit: EA ...

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1-1/26" CLAMPTWO BOLTSUnit: EA

B & K ProLine 6700CTS Ball Valve, 1/2 in Connection, Slip x Slip Connection, Port Type: Full, 100 psi, Schedule Rating: SCH 40, Temperature Rating: 180 deg F, Media: Water, Softgoods Material: EPDM,...

B & K ProLine 6700CTS Ball Valve, 1/2 in Connection, Slip x Slip Connection, Port Type: Full, 100 psi, Schedule Rating: SCH 40, Temperature Rating: 180 deg F, Media: Water, Softgoods Material: EPDM, PTFE, Body Material: CPVC, WhiteSize In=1/2PSI=100CPVCSOLVENT WELDUnit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Fits any 3/4 in hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent...

Fits any 3/4 in hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7, ASSE 1019 approved, UPC, Canadian UPC approved.UPC CodedBRASS - FEMALE X MALEUnit: EA

Mueller 1-Bolt Pipe Repair Clamp, Nominal Opening Size: 1/2 in, Working Pressure: 150 psi, Temperature Rating: 167 deg F, 3 in L, 430 Stainless SteelSize In=1/23" CLAMPSINGLE BOLTUnit: EA ...

Mueller 1-Bolt Pipe Repair Clamp, Nominal Opening Size: 1/2 in, Working Pressure: 150 psi, Temperature Rating: 167 deg F, 3 in L, 430 Stainless SteelSize In=1/23" CLAMPSINGLE BOLTUnit: EA

3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.MPT\In=1/2PSI=125BRASSMPT X GHTUnit: EA ...

3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.MPT\In=1/2PSI=125BRASSMPT X GHTUnit: EA

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.Size In=1/2PSI=150PVCFPT x FPTUnit: EA ...

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.Size In=1/2PSI=150PVCFPT x FPTUnit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Size In=4 x 2MALLEABLE IRON HEX BUSHINGUnit: EA ...

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Size In=4 x 2MALLEABLE IRON HEX BUSHINGUnit: EA

Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.Size In =3/4BRASSFIP X SOLDERUnit: EA

Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.Size In =3/4BRASSFIP X SOLDERUnit: EA

Brass body and nut, rubber gaskets. Rated up to 125 psi at 210 deg F.NO LEADIPS-CTS In=3/4 & 1BRASSDUAL SIZE IPS & CTSUnit: EA

Brass body and nut, rubber gaskets. Rated up to 125 psi at 210 deg F.NO LEADIPS-CTS In=3/4 & 1BRASSDUAL SIZE IPS & CTSUnit: EA