Account
My Items
OR
Multinautic Mooring Cleat, Dimensions: 6 in L, Stainless Steel, Includes: (4) #10, 1-1/2 in Wood ScrewsUnit: EA
5 in Dia wheel kit. Use to build a boat ramp, includes four 5 in wheels, two mounting brackets and axles. 2000 lb capacity.Unit: EA
6 in flip-up cleat. Cast aluminum.Unit: EA
Galvanized steel cleat. 8 in.Unit: EA
Multinautic 10000 Spare Pin, 1/2 in, Galvanized Steel, Industrial Grade, Suitable for: 10004 and 11003 Dock HingesUnit: EA
With its 22 deg angle, they stay away from boat hull. Their high profile is designed to be used on many dock line sizes and facilitates mooring. Slides ideally in the Uni-track system using T-bolts....
With its 22 deg angle, they stay away from boat hull. Their high profile is designed to be used on many dock line sizes and facilitates mooring. Slides ideally in the Uni-track system using T-bolts. 8 in (two holes).Unit: EA
To be installed on leg pile to protect boats against impacts. Post bumpers are great protection for pipe supported type docks. Protects the boat from contact with the metal dock pipe and hardware at...
To be installed on leg pile to protect boats against impacts. Post bumpers are great protection for pipe supported type docks. Protects the boat from contact with the metal dock pipe and hardware at dock level. Easily fits over 2 in OD dock pipe and rests securely against the dock. Has an inflation valve to adjust firmness.Unit: EA
Turns a ladder into a flip-up one to easily remove from water when needed. Design to fit on 15513 & 15524 Multinautic four-step tubular dock ladders. May be adapted to other ladders but they will...
Turns a ladder into a flip-up one to easily remove from water when needed. Design to fit on 15513 & 15524 Multinautic four-step tubular dock ladders. May be adapted to other ladders but they will need some adjustments.Unit: EA
Used in the back of corner, pile guide, leg holder or a connector hinge to reduce stress from bolts.Unit: EA
Multinautic 13300 Spare Pin, 3/4 in, Steel, Suitable for: #10007, #13303 or to Attach #13309, #13310 Dock HingesUnit: EA
Extra strong duracoated steel. For floating or stationary docks. three 16 in x 3 -1/2 in step (40 cm x 9 cm). No-slip steps. Sturdy tubular handrails with 400 lb (180 kg) capacity. Three...
Extra strong duracoated steel. For floating or stationary docks. three 16 in x 3 -1/2 in step (40 cm x 9 cm). No-slip steps. Sturdy tubular handrails with 400 lb (180 kg) capacity. Three easy-to-assemble pieces including two handrails and step section.Unit: EA
Stainless steel bolts and nuts with special "T" shape head. Pack of 2.Unit: PK 2
Industrial, heavy-duty gauge 5 in x 5 in x 1/4 in. Used to connect two floating docks together.Unit: EA
Multinautic Dock Cleat, Dimensions: 6 in L, Nylon, Black, Includes: #12 x 3 in BoltsUnit: EA
Connector hinge with 1/2 in pin. Galvanized steel.Unit: EA
Leg holder for dock 5 in x 5 in. Used to hold dock leg pile up to 1-7/8 in Dia.Unit: EA
For use with corner, pile guide and leg holder. 5 in x 5 in x 1/8 in.Unit: EA
Pre-spliced, double-braided marine-grade dock line. For boats up to 20 ft.Unit: EA
2 in x 20 ft strap. 1,300 maximum lb working load. Bolt and hook included.Unit: EA
Wheel kit for 1200 lb. capacity ramp. This includes eight 4 in wheels, 16 galvanized steel bolts and nut kits, eight wheel axels, 16 aluminum support plates and construction plan.Unit: EA
Multinautic 10000 Inside Corner, Mounting Hole Size: 7/16 x 3/4 in, Dimensions: 6 in L x 5 in W x 1/8 in Thick, Galvanized, Suitable for: Stationary Dock with #10003 or #10010 Back PlateUnit: EA ...
Multinautic 10000 Inside Corner, Mounting Hole Size: 7/16 x 3/4 in, Dimensions: 6 in L x 5 in W x 1/8 in Thick, Galvanized, Suitable for: Stationary Dock with #10003 or #10010 Back PlateUnit: EA
Multinautic Ring and Lag Screw, Dimensions: 2.5 in Dia, Stainless SteelUnit: EA
Hot dipped galvanized joist. 2-3/4 in x 5 in x 1/8 in.Unit: EA
Black powder-coated. 3 in.Unit: EA