Account
My Items
OR
The driving head fits over the ground rod to protect the rod end from "mushrooming" as the ground rod is driven into earth.Unit: EA
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.Unit: EA
With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper.Unit: EA
Silicon bronze for copper to copper. UL listed.Unit: EA
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness...
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.Unit: EA
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and...
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.Unit: EA
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and...
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.Unit: EA
The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC Article 250.94 bonding...
The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service entrance equipment and is a convenient way to interconnect and terminate grounding conductors from telephone, CATV or radio and television antennas. The IBTB includes corrosion-resistant, stainless steel mounting hardware...
For use on copper, aluminum and ACSR conductors, the copper alloy bolt and pressure bar are completely tin-plated. Tin plating with a spacer allows connection of copper-to-copper, copper-to-aluminum...
For use on copper, aluminum and ACSR conductors, the copper alloy bolt and pressure bar are completely tin-plated. Tin plating with a spacer allows connection of copper-to-copper, copper-to-aluminum and aluminum-to-aluminum. For 3/0 stranded 350 kcmil stranded.Unit: EA
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.Unit: EA
Use when compression couplers are required around ground rod splices. Enable ground rods to be driven deep quickly and easily without the risk of rod separation. Manufactured of high-strength...
Use when compression couplers are required around ground rod splices. Enable ground rods to be driven deep quickly and easily without the risk of rod separation. Manufactured of high-strength silicon bronze. Coupling is tapered, so when the rod is driven into the coupling the two parts compress to form a conductive connection.Unit: EA