STANLEY-BOSTITCH

Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field...

Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design...

Bostitch Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 2 mm, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 18, 0.0475 in Dia, 1 in L, Brown, Steel,...

Bostitch Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 2 mm, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 18, 0.0475 in Dia, 1 in L, Brown, Steel, Coated, Suitable for: BTFP12233, SB-1842BN, SB-2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, GBT1850K NailersUnit: BX 1M

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Blunt Diamond, Shank Type: Ring, 0.099 in Dia, 2-1/2 in L, Steel, Suitable for: N80CB,...

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Blunt Diamond, Shank Type: Ring, 0.099 in Dia, 2-1/2 in L, Steel, Suitable for: N80CB, N86C, N89C, N100C, N100CPP, N75C Pneumatic Nailer, DUOFAST CNW-75, Hitachi NV83A, Makita AN901, Max 890C, Paslode F275C,P275C, F325C, P325C, 5300C, Porter-Cable Coil350, Senco SCN60, SCN65 NailerUnit: BX36C

Includes 1 mender and 1 threaded end fittings. Simple 3-step process includes unscrew, cut and replace.Unit: EA

Includes 1 mender and 1 threaded end fittings. Simple 3-step process includes unscrew, cut and replace.Unit: EA

This 21 deg plastic collated framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton....

This 21 deg plastic collated framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 21 deg plastic collated framing nailer for efficiency.Unit: EA

Bostitch Finish Nail, Collation Type: Glue, Collation Angle: 25 deg, Head Diameter: 1.8 mm, Head Type: Round, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 1-1/4 in L, Galvanized...

Bostitch Finish Nail, Collation Type: Glue, Collation Angle: 25 deg, Head Diameter: 1.8 mm, Head Type: Round, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 1-1/4 in L, Galvanized Steel, Coated, Suitable for: N59FN, N60FN, N62FN, N62FNK-2, BTFP72156 NailersUnit: BX36C

Bostitch Siding Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Point Type: Blunt Diamond, Shank Type: Smooth, 0.092 in Dia, 2 in L, Steel, Thickcoat, Suitable for: N63CP, N64C,N66C, N66B...

Bostitch Siding Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Point Type: Blunt Diamond, Shank Type: Smooth, 0.092 in Dia, 2 in L, Steel, Thickcoat, Suitable for: N63CP, N64C,N66C, N66B Pneumatic Nailer, Hitachi NV65AH, Max CN565, Makita AN611, Porter-Cable COIL200, COIL250 ToolsUnit: BX36C

1 in plastic Bostitch caps & 5/16th crown, 18 ga 1 in staples eliminate pull-through when installing felt, house wrap and foam board insulation. For use with Bostitch cap stapler (273.5660) fits...

1 in plastic Bostitch caps & 5/16th crown, 18 ga 1 in staples eliminate pull-through when installing felt, house wrap and foam board insulation. For use with Bostitch cap stapler (273.5660) fits Bostitch tools SB150SLBC-1.Unit: PK 1M

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 28 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.131 in Dia, 3-1/2 in L, Steel,...

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 28 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.131 in Dia, 3-1/2 in L, Steel, Suitable for: Model N79WW, N80SB, N86S, N88WWB, N100S, F28WW, GF28WW Pneumatic NailerUnit: PK 2M

Bostitch Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 2 mm, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 18, 0.0475 in Dia, 1-3/16 in L, Brown,...

Bostitch Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 2 mm, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 18, 0.0475 in Dia, 1-3/16 in L, Brown, Steel, Coated, Suitable for: APC-2IN1, APC-BN, BT125-1, BT125K-2, BT1855-E, BT200-1, BT200K-2, BT35B-1, BT50B-1, GBT1850K-E, SB-1842BN, SB-1850BN, SB-2IN1 NailersUnit: BX 1M

Information on nail compatibility is available online at www.bostitch.com.Unit: BX72C

Information on nail compatibility is available online at www.bostitch.com.Unit: BX72C

This Smart Point 15 ga "FN" style angle finish nailer kit offers greater nail collation density so that you can drive more nails without having to refill your magazine often. This FN style 15 ga...

This Smart Point 15 ga "FN" style angle finish nailer kit offers greater nail collation density so that you can drive more nails without having to refill your magazine often. This FN style 15 ga holds 130 nails in its magazine compared to our da style 15 ga finish nailer that only holds 100 nails in its magazine. Control the depth of the nail without interrupting workflow and easily remove nails with tool-free jam release feature. Depend on this 15 ga finish nailer kit for efficiency and...

Full round head, diamond point.Unit: PK 1M

Full round head, diamond point.Unit: PK 1M

Bostitch Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 2 mm, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 18, 0.0475 in Dia, 1-3/8 in L, Brown,...

Bostitch Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 2 mm, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 18, 0.0475 in Dia, 1-3/8 in L, Brown, Steel, Coated, Suitable for: BTFP12233, SB-1842BN, SB-2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, GBT1850K NailersUnit: BX 3M

Safety blow gun.Unit: EA

Safety blow gun.Unit: EA

AntiJam' design for maximum productivity. Long reach knuckle saver handle with non-slip comfort grip. Die-cast frame and hardened components for extreme durability. High-capacity bottom load...

AntiJam' design for maximum productivity. Long reach knuckle saver handle with non-slip comfort grip. Die-cast frame and hardened components for extreme durability. High-capacity bottom load magazine with staple count indicator. Extra-wide foot plate prevents tearing and marring. Uses STCR5019, Sku # 744.7915, 'PowerCrown' staples. Use for roofing felt, tar paper, house wrap, insulation, carpet pad and plastic sheeting. Weighs 2.2 lb and stores up to 168 staples (2 full sticks).Unit: EA ...

Bostitch Framing Nail, Collation Type: Paper Tape, Collation Angle: 33 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 3 in L, Steel, Suitable for: Model F33PT,...

Bostitch Framing Nail, Collation Type: Paper Tape, Collation Angle: 33 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 3 in L, Steel, Suitable for: Model F33PT, GF33PT, N90PT Pneumatic NailerUnit: BX25C

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Head Type: Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.12 in Dia, 3 in L, Steel, Thickcoat,...

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Head Type: Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.12 in Dia, 3 in L, Steel, Thickcoat, Suitable for: N80CB, N86C, N89C, N100C, N100CPP, N75C Pneumatic Nailer, DUOFAST CNW-75, Hitachi NV83A, Makita AN901, Max 890C, Paslode F275C,P275C, F325C, P325C, 5300C, Porter-Cable Coil350, Senco SCN60, SCN65 NailerUnit: BX27C

Fits Bostitch S32SX, T40 SX-CT, SB-150SX, SB-2IN1 and SB150SX-HD. Rental.Unit: BX 7M

Fits Bostitch S32SX, T40 SX-CT, SB-150SX, SB-2IN1 and SB150SX-HD. Rental.Unit: BX 7M

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Head Type: Round, Point Type: Diamond, Shank Type: Screw, Material Gauge: 11, 0.12 in Dia, 3 in L, Steel, Thickcoat,...

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Head Type: Round, Point Type: Diamond, Shank Type: Screw, Material Gauge: 11, 0.12 in Dia, 3 in L, Steel, Thickcoat, Suitable for: N80CB, N86C, N89C, N100C, N100CPP, N75C Pneumatic Nailer, DUOFAST CNW-75, Hitachi NV83A, Makita AN901, Max 890C, Paslode F275C,P275C, F325C, P325C, 5300C, Porter-Cable Coil350, Senco SCN60, SCN65 NailerUnit: BX27C

This flooring stapler kit is used for floor nailing. Pneumatic power drives nails and cleats into the wood surface quickly and efficiently. Depend on this flooring stapler kit for stability and a...

This flooring stapler kit is used for floor nailing. Pneumatic power drives nails and cleats into the wood surface quickly and efficiently. Depend on this flooring stapler kit for stability and a comfortable grip.Unit: EA

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 28 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.12 in Dia, 2-3/8 in L, Steel, Thickcoat, Suitable for:...

Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 28 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.12 in Dia, 2-3/8 in L, Steel, Thickcoat, Suitable for: Model N79WW, N80SB, N86S, N88WWB, N100S, F28WW, GF28WW Pneumatic Nailer, FM350A Porter-CableUnit: BX2M

Bostitch Framing Nail, Collation Angle: 15 deg, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 2-1/2 in L, Steel, Suitable for: N80CB, N86C, N89C, N100C, N100CPP, N75C Pneumatic Nailer,...

Bostitch Framing Nail, Collation Angle: 15 deg, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 2-1/2 in L, Steel, Suitable for: N80CB, N86C, N89C, N100C, N100CPP, N75C Pneumatic Nailer, DUOFAST CNW-75, Hitachi NV83A, Makita AN901, Max 890C, Paslode F275C,P275C, F325C, P325C, 5300C, Porter-Cable Coil350, Senco SCN60, SCN65 NailerUnit: BX45C

Bostitch Framing Nail, Collation Type: Plastic Strip, Collation Angle: 21 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.131 in Dia, 3 in L, Steel,...

Bostitch Framing Nail, Collation Type: Plastic Strip, Collation Angle: 21 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.131 in Dia, 3 in L, Steel, Galvanized, Suitable for: N88RH, F21PL, F21PL2 Pneumatic Nailer, DeWalt D51845, DUOFAST CN350B, Hitachi NR83A, MR90AC, Makita AN922, AM8300, Paslode 5300, F350SRH, Porter-Cable FR350, FR350MAG, Ridgid R350RHA, Senco SCN60, SCN65, SN65C, FramePro FRH ToolsUnit: BX4M