GENERAL TOOLS

The #843/1 pencil compass and scriber is ideal for marking and scribing contours and circles.Unit: EA

The #843/1 pencil compass and scriber is ideal for marking and scribing contours and circles.Unit: EA

Precision drill guide multi-purpose drill accessory is ideal for angled drilling, doweling, plug cutting and edge sanding. Attaches to any 3/8 or 1/2 in power drill. Adjustable in 5 deg increments...

Precision drill guide multi-purpose drill accessory is ideal for angled drilling, doweling, plug cutting and edge sanding. Attaches to any 3/8 or 1/2 in power drill. Adjustable in 5 deg increments from 0 to 45 deg, left and right. V-guides on the base permit drilling through the dowel or other rounded stock. A slide lock facilitates sanding and buffing applications. This drill guide and chuck is portable and lightweight, folding flat for toolbox storage.Unit: EA

The #532 2.5X pocket magnifier is ideal for toolmakers, jewelers, instrument makers and other craftsmen needing sharp magnification without eyestrain.Unit: CD

The #532 2.5X pocket magnifier is ideal for toolmakers, jewelers, instrument makers and other craftsmen needing sharp magnification without eyestrain.Unit: CD

The #560 Telescoping 2 in x 3-1/2 in glass inspection mirror makes it possible for toolmakers, assemblers, inspectors and mechanics to see deep inside inaccessible workpieces and machines.Unit: EA ...

The #560 Telescoping 2 in x 3-1/2 in glass inspection mirror makes it possible for toolmakers, assemblers, inspectors and mechanics to see deep inside inaccessible workpieces and machines.Unit: EA

The #189 undersink drain pliers fit all sink drain, slip, trap and compression nuts, as well as basin and sink lock nuts. It even works with oil filters.Unit: CD

The #189 undersink drain pliers fit all sink drain, slip, trap and compression nuts, as well as basin and sink lock nuts. It even works with oil filters.Unit: CD

General Thread Repair File, Teeth per Inch: 9, 10, 12, 16, 20, 27, 28 and 32, Carbon Steel Blade, Black Oxide Blade, 7/16 in W Blade, 8-1/2 in OALUnit: CD

General Thread Repair File, Teeth per Inch: 9, 10, 12, 16, 20, 27, 28 and 32, Carbon Steel Blade, Black Oxide Blade, 7/16 in W Blade, 8-1/2 in OALUnit: CD

Precision made, with etched fine black graduations, on stainless steel finish. Side 1 including 10, 100 and side 2 including 32, 64.Unit: CD

Precision made, with etched fine black graduations, on stainless steel finish. Side 1 including 10, 100 and side 2 including 32, 64.Unit: CD

General Tools Multi-Size Screwdriver Bit 2 in. L 18 pc.Brand Name: General ToolsDrive Type: AssortmentLength: 2 in.Product Type: Screwdriver BitShank Diameter: - in.Size: Multi-SizeNumber in...

General Tools Multi-Size Screwdriver Bit 2 in. L 18 pc.Brand Name: General ToolsDrive Type: AssortmentLength: 2 in.Product Type: Screwdriver BitShank Diameter: - in.Size: Multi-SizeNumber in Package: 18 pc.Packaging Type: CardedMagnetic: NoUnit: EA ...

General Arch Punch Set, Steel, Number of Pieces: 7, Includes: 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in and 1 in Punches and Plastic Roll PouchUnit: EA

General Arch Punch Set, Steel, Number of Pieces: 7, Includes: 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in and 1 in Punches and Plastic Roll PouchUnit: EA

General 1 Forged Steel PunchBrand Name: GENERALDiameter: 3/8 in.Material: SteelProduct Type: PunchNumber in Package: 1 pc.Length: 5/16 in.Unit: EA ...

General 1 Forged Steel PunchBrand Name: GENERALDiameter: 3/8 in.Material: SteelProduct Type: PunchNumber in Package: 1 pc.Length: 5/16 in.Unit: EA

Cuts plate glass from 1/8 in to 1/4 in thick. Steel wheel with honed angle of 120 deg for cutting single and double strength glass. Tooth design to remove rough edges. Ball end handle for snapping...

Cuts plate glass from 1/8 in to 1/4 in thick. Steel wheel with honed angle of 120 deg for cutting single and double strength glass. Tooth design to remove rough edges. Ball end handle for snapping of scored glass.Unit: CD

General Hollow Punch, 1/2 in Tip, Steel, Black-Oxide, 4-1/2 in LUnit: EA

General Hollow Punch, 1/2 in Tip, Steel, Black-Oxide, 4-1/2 in LUnit: EA

For use with all General cutters for cutting copper tubing.Unit: CD 2

For use with all General cutters for cutting copper tubing.Unit: CD 2

General's high-quality precision screwdriver sets are ideal for hobbyists, technicians, mechanics and DIY. Also used by jewelers, watchmakers, instrument makers, subminiature parts assemblers and...

General's high-quality precision screwdriver sets are ideal for hobbyists, technicians, mechanics and DIY. Also used by jewelers, watchmakers, instrument makers, subminiature parts assemblers and model makers. The ergonomically designed handle provides greater control and comfort. Black oxide blades ensure a precise fit and prevent corrosion.Unit: EA

General Hollow Punch, 3/16 in Tip, Steel, Black-Oxide, 4 in LUnit: EA

General Hollow Punch, 3/16 in Tip, Steel, Black-Oxide, 4 in LUnit: EA

The #555 1-1/4 in round glass inspection mirror makes it possible for toolmakers, assemblers, inspectors and mechanics to see deep inside inaccessible workpieces and machines.Unit: CD

The #555 1-1/4 in round glass inspection mirror makes it possible for toolmakers, assemblers, inspectors and mechanics to see deep inside inaccessible workpieces and machines.Unit: CD

General Hollow Punch, 5/16 in Tip, Steel, Black-Oxide, 4-3/32 in LUnit: EA

General Hollow Punch, 5/16 in Tip, Steel, Black-Oxide, 4-3/32 in LUnit: EA

General Tools Screw Starter 5 in. LBrand Name: General ToolsDrive Size: 3 to 5/16 inShaft Length: 5 in.Product Type: Screw StarterNumber in Package: 1 EARatcheting: NoHandle Material:...

General Tools Screw Starter 5 in. LBrand Name: General ToolsDrive Size: 3 to 5/16 inShaft Length: 5 in.Product Type: Screw StarterNumber in Package: 1 EARatcheting: NoHandle Material: PlasticHardened: NoPackaging Type: ClamshellDrive Type: SlottedNo. 3 to 5/16 in.Unit: EA ...

The #19 square head steel protractor and depth gage takes the guesswork out of measuring, marking, reading and transferring angles and depths.Unit: EA

The #19 square head steel protractor and depth gage takes the guesswork out of measuring, marking, reading and transferring angles and depths.Unit: EA

General 1 Forged Steel PunchBrand Name: GENERALDiameter: 1/8 in.Material: SteelProduct Type: PunchNumber in Package: 1 pc.Length: 1/8 in.Unit: EA ...

General 1 Forged Steel PunchBrand Name: GENERALDiameter: 1/8 in.Material: SteelProduct Type: PunchNumber in Package: 1 pc.Length: 1/8 in.Unit: EA

Four tools in one and folds into a convenient travel holster. Tool can be used as a straight or pistol grip style. Swivel locking chuck accepts a variety of saw blades for cutting applications or...

Four tools in one and folds into a convenient travel holster. Tool can be used as a straight or pistol grip style. Swivel locking chuck accepts a variety of saw blades for cutting applications or the insert bit Adapter for using the tool as a screwdriver. Removable handle cap neatly stores seven insert bits inside the tool. Included in the set are (3) reciprocating saw blades (drywall, metal, wood), (7) insert bits, 1/4 in socket Adapter, 4 in magnetic insert bit holder, dual position locking...

Solid brass fasteners with nickel plating will not rust. Kit Contains 2-Piece setting tool with knurled body for greater comfort and safety and 6 fastener sets.Unit: CD

Solid brass fasteners with nickel plating will not rust. Kit Contains 2-Piece setting tool with knurled body for greater comfort and safety and 6 fastener sets.Unit: CD

General Tools 7/8 in.-4 in. Dia. Bi-Metal Circle CutterBrand Name: General ToolsLength: 0.875 in.Product Type: Circle CutterShank Diameter: 3/8 in.Diameter: 7/8 in.Material: Bi-MetalCompatible...

General Tools 7/8 in.-4 in. Dia. Bi-Metal Circle CutterBrand Name: General ToolsLength: 0.875 in.Product Type: Circle CutterShank Diameter: 3/8 in.Diameter: 7/8 in.Material: Bi-MetalCompatible Arbors: -Arbor Included: NoUnit: EA

The Standard driver is loaded with 7 double end professional quality bits. This assortment provides the 14 most popular tips for driving screws. The shaft opening also serves as 1/4 in hex...

The Standard driver is loaded with 7 double end professional quality bits. This assortment provides the 14 most popular tips for driving screws. The shaft opening also serves as 1/4 in hex driver.ALL-IN-ONEUnit: EA