Account
My Items
OR
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3...
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and...
Drip watering bubbler. Adjustable bubbler rotates easily to preferred water flow - from full coverage for shrubs and large potted trees to shut-off position.Unit: BAG
Drip watering bubbler. Adjustable bubbler rotates easily to preferred water flow - from full coverage for shrubs and large potted trees to shut-off position.Unit: BAG10
Mounted on 1/4 in barbed adaptor. Mists approximately 3 ft Dia circle. Use to spray ferns and other tropical plants in hanging baskets, greenhouses and atriums. Flow rate of 6 gph at 25 psi.Unit:...
Mounted on 1/4 in barbed adaptor. Mists approximately 3 ft Dia circle. Use to spray ferns and other tropical plants in hanging baskets, greenhouses and atriums. Flow rate of 6 gph at 25 psi.Unit: BAG
Adjustable misters and 4 in high-density polyethylene risers with 1/4 in barbed adaptors. Adjustable from fine to heavy mist up to 3 ft Dia. Flow rate of 4-7 gph at 25 psi.Unit: BAG 5
Closes off ends of 1/2 in poly hose. 1/2 in hose end clamp. Easy to remove. 25/Bag.Unit: BAG
Close off ends and flush hose. Made from ABS. For water pressure up to 60 psi. Closes ends of 5/8 in (0.690 to 0.700 in OD) poly hose when frequent flushing is necessary.Unit: EA
For use with 1/4 in (0.160 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi. Double barbed design allows use...
For use with 1/4 in (0.160 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi. Double barbed design allows use with high water pressures.Unit: BAG25
Join or connect two lengths of line. Exclusive double barbed design allows use with higher water pressures. For use with 1/4 ft (0.16 in ID) tube only. Design allows water pressures up to 50...
Join or connect two lengths of line. Exclusive double barbed design allows use with higher water pressures. For use with 1/4 ft (0.16 in ID) tube only. Design allows water pressures up to 50 psi.Unit: BAG25
For use with 1/4 in (0.160 in ID) tube only. Exclusive double barb design allows water pressures up to 50 psi.Unit: BAG25
For use with 1/2 in (0.62 to 0.63 in OD) hose only. Connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. 3/4 in hose thread swivel x 1/2 in compression...
For use with 1/2 in (0.62 to 0.63 in OD) hose only. Connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. 3/4 in hose thread swivel x 1/2 in compression adaptor.Unit: EA
For use with 1/2 in (0.62 in to 0.63 in) hose only. Connects 1/2 in poly hose to 3/4 in male pipe thread. Includes washer. 3/4 in pipe thread swivel x 1/2 in compression adaptor.Unit: EA