CARLON

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial...

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

Carlon Ceiling Box, Clamp Cable Entry, 20 cu-in, Round Shape, Polycarbonate, Blue, 4 in Width, 4 in Depth, 2-1/4 in Height, Captive Nail Mounting, Includes: Ground Lug and ScrewUnit: EA

Carlon Ceiling Box, Clamp Cable Entry, 20 cu-in, Round Shape, Polycarbonate, Blue, 4 in Width, 4 in Depth, 2-1/4 in Height, Captive Nail Mounting, Includes: Ground Lug and ScrewUnit: EA

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing...

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit.Size In=3/4PVC/NON-METALLICTWO HOLESUnit: PK 5

Carlon Switch Box, 1/2 in Hub, 2 Outlets, 2 Gangs, Square Shape, 32 cu-in, Dimensions: 4.62 in L x 4.62 in W x 1.98 in H, PVC, GrayUnit: EA

Carlon Switch Box, 1/2 in Hub, 2 Outlets, 2 Gangs, Square Shape, 32 cu-in, Dimensions: 4.62 in L x 4.62 in W x 1.98 in H, PVC, GrayUnit: EA

New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed.Unit: EA

New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

Quick connect, fold and snap together. No cement, set screws or locknuts. For 600 V use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors...

Quick connect, fold and snap together. No cement, set screws or locknuts. For 600 V use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concretetight when used with Carlon ENT. UL listed.Unit: EA

With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall...

With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially...

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

Weather resistant cover for double toggle switch applications. Vertical mount. UV-resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine listed, CSA...

Weather resistant cover for double toggle switch applications. Vertical mount. UV-resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine listed, CSA certified.Unit: EA

For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA ...

For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA

Non-metallic white ceiling box cover, flat and blank. 4 in Dia. UL listed.Unit: EA

Non-metallic white ceiling box cover, flat and blank. 4 in Dia. UL listed.Unit: EA

CANTEX 5133825 is a 1 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.Unit: EA

CANTEX 5133825 is a 1 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.Unit: EA

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as...

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as described in the National Electrical Code.Unit: EA

Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial...

Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.Unit: COIL

Carlon's Snap Strap offers a unique support strap designed especially for the installation of PVC conduit. Also suitable for installations of rigid steel. This high-strength, non-metallic clamp...

Carlon's Snap Strap offers a unique support strap designed especially for the installation of PVC conduit. Also suitable for installations of rigid steel. This high-strength, non-metallic clamp allows conduit to expand and contract freely, eliminating the bowing commonly seen from the expansion and contraction of conduit caused by varying temperature changes. Finished installations have a neat, attractive appearance on exposed applications.Unit: EA

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as...

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as described in the National Electrical Code.Unit: EA

Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed. 2.63 in H x 1.31 in W opening.Unit: EA

Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed. 2.63 in H x 1.31 in W opening.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

Suitable for paneling masonry, plaster, sheetrock, tile and all wall coverings. Brilliant electric blue. UL listed.Unit: EA

Suitable for paneling masonry, plaster, sheetrock, tile and all wall coverings. Brilliant electric blue. UL listed.Unit: EA