Account
My Items
OR
Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.Unit: EA
Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall....
Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall. Lightweight and durable and engraved with NEC approved conductor fill. Suitable for masonry walls. 68 cu-in capacity and measures 3.41 in x 7.57 in x 2.89 in.Unit: EA
Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed.Unit: EA
Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong...
Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one...
Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety....
Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL listed components.Unit: EA
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With...
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL listed, RoHS Compliance.Unit: EA
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA
Carlon Ceiling Fan Box, 18 cu-in, Polycarbonate, Blue, 2-3/4 in Depth, Captive Nail Mounting, Suitable for: Fixture Support Up to 50 lbUnit: EA
The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy...
The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp-opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier...
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA
Carlon Conduit Coupling, 3 in Trade, PVC, Gray, 3-19/32 in Length, 2.688 in ID x 3.406 in OD Diameter, Suitable for: SCH 40 and 80 ConduitsUnit: EA
With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4 to 3 in, six integral clamps. 4 in Dia non-metallic ceiling box, 20 cu-in volume. Listed for fixture support up to 50 lb. 4 in...
With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4 to 3 in, six integral clamps. 4 in Dia non-metallic ceiling box, 20 cu-in volume. Listed for fixture support up to 50 lb. 4 in Dia x 2-1/4 in D. Meets NEMA OS-2, UL listed and RoHS compliance.Unit: EA
Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2 in D x 3-7/10 in x 7-3/5 in.Unit: EA
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA
For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.Unit: EA
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651...
For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA
Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as...
Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as described in the National Electrical Code.Unit: EA
For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA ...
For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA
Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing...
Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit.Unit: PK 5
For use with non-metallic wiring systems. Non-conductive, noncorrosive and impact-resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local...
For use with non-metallic wiring systems. Non-conductive, noncorrosive and impact-resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2 in plus four 3/4 in threaded ports. UL listed.Unit: EA