Account
My Items
OR
Unit: EA
Do not exceed working load limit.Unit: FT
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Steel, Nickel-PlatedUnit: EA
High carbon steel, heat treated.Unit: L FT
Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.Unit: L FT
Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Low Carbon Steel, Zinc, Silver, Material Diameter: 9/64 in, 275 ft LUnit: L FT
Two cable ferrules and two cable stops. Made from aluminum. Do not use on coated cable.Unit: EA
Campbell Anchor Shackle, Working Load Limit: 1000 lb, Trade Size: 3/8 in, Pin Type: Screw, Carbon Steel, ZincUnit: EA
Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting.Unit: L FT
Campbell Pulley, Single Sheave, Working Load Limit: 50 lb, Eye Diameter: 5/8 in, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Brass, Block Material: Zinc, NickelUnit: EA
Ratchet load binder used to tighten chain, typically for cargo securement. 8 in take-up. For chain size 5/16 in (System 7) and for chain size 3/8 in (System 4) Meets U.S. D.O.T. 393.100-393.102...
Ratchet load binder used to tighten chain, typically for cargo securement. 8 in take-up. For chain size 5/16 in (System 7) and for chain size 3/8 in (System 4) Meets U.S. D.O.T. 393.100-393.102 requirements for use with chain. Do not use for overhead lifting or hoisting or exceed the working load limit.Unit: EA
Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and...
Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.Unit: EA
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.Unit: EA
Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Poly-Coated, White, Material Diameter: 9/64 in, 125 ft LUnit: L FT
Do not exceed working load limit.Unit: EA
Do Not use on coated cable, if used on coated cable, remove coating from assembly area.Unit: EA
For use with proof coil or high-test chain. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components...
For use with proof coil or high-test chain. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. No. T5423300 For chain 1/4 in x 5/16 in, Opening of 7/16, pin of 3/8 in. No. T5423301 For chain 3/8 in, Opening of 1/2 in pin of 7/16 in.Unit: EA
High-strength steel. Thermal heat-treated for superior strength. Meets FMCSA, CVSA, NACM & ASTM requirements. Chain Links 100% proof tested. 4:1 design factor vs 3:1 for webbing. No worries...
High-strength steel. Thermal heat-treated for superior strength. Meets FMCSA, CVSA, NACM & ASTM requirements. Chain Links 100% proof tested. 4:1 design factor vs 3:1 for webbing. No worries concerning ultra-violet degrading. Gold finish for quick recognition.Unit: EA