ACORN INTERNATIONAL

Acorn International Screw, 3 in L, Thread Type: High-Low, Drive Type: Hex, Point Type: Type 17, Package Quantity: 250 BAG, Barn Red, Applicable Materials: Metal, WoodSize No. 14 x 3 Inch - Head Size...

Acorn International Screw, 3 in L, Thread Type: High-Low, Drive Type: Hex, Point Type: Type 17, Package Quantity: 250 BAG, Barn Red, Applicable Materials: Metal, WoodSize No. 14 x 3 Inch - Head Size 5/16öColor=Barn RedMETAL TO WOODHEX HEADUnit: BAG

Metal-to-metal screws are sealing self-drilling tapping screws made from Steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a...

Metal-to-metal screws are sealing self-drilling tapping screws made from Steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4 in total thickness with no predrilling. #12-14 screws are 5/16 in across flats hex washer head and #14-14 screws are 3/8 in across flats hex washer...

Replaces old, loose or popped gutter spikes. No pre-drilling, 500 hrs dacrotized coat and low profile head. Note, each blister card includes ten screws, ten 5 in plastic ferrules and one #3 square...

Replaces old, loose or popped gutter spikes. No pre-drilling, 500 hrs dacrotized coat and low profile head. Note, each blister card includes ten screws, ten 5 in plastic ferrules and one #3 square drive bit."GUTTER-LOK"Lgth In=7Color=BrownUnit: CD 10

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

Acorn International Screw, 2-1/2 in L, Thread Type: High-Low, Drive Type: Hex, Point Type: Type 17, Galvanized, Package Quantity: 250 BAG, Applicable Materials: Metal, WoodSize No. 14 x 2-1/2 Inch -...

Acorn International Screw, 2-1/2 in L, Thread Type: High-Low, Drive Type: Hex, Point Type: Type 17, Galvanized, Package Quantity: 250 BAG, Applicable Materials: Metal, WoodSize No. 14 x 2-1/2 Inch - Head Size 5/16öColor=GalvanizedMETAL TO WOODHEX HEADUnit: BAG

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

#9-15 stainless steel metal to wood screws are sealing self-piercing tapping screws made from type 316 passivated stainless steel for roofing and siding applications in corrosive environments. A 1/4...

#9-15 stainless steel metal to wood screws are sealing self-piercing tapping screws made from type 316 passivated stainless steel for roofing and siding applications in corrosive environments. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All Acorn International screws are...

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8 in gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing...

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8 in gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 ga, Boxed.Size In=1/2GALVANIZED STEELUnit: BX250

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers,...

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls."TIMBER-MATE"Lgth In=10Unit: BX 50

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2...

Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2 in less than over center joist spacing. 13 ga.BOXEDJoist Spacing OC=24CARBON STEEL WIREUnit: BX100

Acorn International Screw, 1 in L, Drive Type: Hex, Point Type: Self-Drilling, Package Quantity: 250 BAG, Black, Applicable Materials: MetalSize No. 14 x 1 InchColor=BlackMETAL TO WOODHEX HEADUnit:...

Acorn International Screw, 1 in L, Drive Type: Hex, Point Type: Self-Drilling, Package Quantity: 250 BAG, Black, Applicable Materials: MetalSize No. 14 x 1 InchColor=BlackMETAL TO WOODHEX HEADUnit: BAG

Support rebar in concrete slabs and foundations. Designed to fit both 3/8 and 1/2 in rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500.Ht In=2-1/4PLASTICUnit...

Support rebar in concrete slabs and foundations. Designed to fit both 3/8 and 1/2 in rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500.Ht In=2-1/4PLASTICUnit: PK500

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers,...

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls."TIMBER-MATE"Lgth In=6Unit: BX 50

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

Acorn International Screw, 3 in L, Thread Type: High-Low, Drive Type: Hex, Point Type: Type 17, Galvanized, Package Quantity: 250 BAG, Applicable Materials: Metal, WoodSize No. 12 x 3...

Acorn International Screw, 3 in L, Thread Type: High-Low, Drive Type: Hex, Point Type: Type 17, Galvanized, Package Quantity: 250 BAG, Applicable Materials: Metal, WoodSize No. 12 x 3 InchColor=GalvanizedMETAL TO WOODHEX HEADUnit: BAG

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head...

#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1000 hr salt spray test dacro-coated. Colored screws are...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point...