PRIME LINE PRODUCTS

Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.Unit: EA

Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.Unit: EA

Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.Unit: CD 2

Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.Unit: CD 2

Spring-loaded vinyl tilt latch, used on single or double-hung, aluminum or vinyl windows. Use in sash panels designed to tilt in and down from top of window. Includes 1 left hand latch, 1 right hand...

Spring-loaded vinyl tilt latch, used on single or double-hung, aluminum or vinyl windows. Use in sash panels designed to tilt in and down from top of window. Includes 1 left hand latch, 1 right hand latch and 1 set of screws.Unit: PR

Prime-Line Sliding Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Bolt Hole Diameter: 3/16 in, Aluminum, Aluminum, Gray, Dimensions: 2 in L x 7/8 in W, Suitable for: Showcase Sliding Doors, Includes:...

Prime-Line Sliding Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Bolt Hole Diameter: 3/16 in, Aluminum, Aluminum, Gray, Dimensions: 2 in L x 7/8 in W, Suitable for: Showcase Sliding Doors, Includes: (2) Installation ScrewsUnit: EA

Prime-Line Sliding Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Bolt Hole Diameter: 3/16 in, Aluminum, White, Dimensions: 2 in L x 7/8 in W, Suitable for: Showcase Sliding Doors, Includes: (2)...

Prime-Line Sliding Door Lock, Door Thickness: 3/16, 1/8, 1/4 in, Bolt Hole Diameter: 3/16 in, Aluminum, White, Dimensions: 2 in L x 7/8 in W, Suitable for: Showcase Sliding Doors, Includes: (2) Installation ScrewsUnit: EA

1 in square cavity allows self-alignment of center mounted drawer tracks. 1-13/16 in hole spacing. Includes installation screws. Raw finish.Unit: CD

1 in square cavity allows self-alignment of center mounted drawer tracks. 1-13/16 in hole spacing. Includes installation screws. Raw finish.Unit: CD

Used to hold track to back of cabinet, fits most popular side mount rails. Contains two backplates, two sets of installation screws.Unit: EA

Used to hold track to back of cabinet, fits most popular side mount rails. Contains two backplates, two sets of installation screws.Unit: EA

The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.Unit: CD 8

The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.Unit: CD 8

Rollers mount at the front of the drawer opening and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right...

Rollers mount at the front of the drawer opening and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller and 1 set of installation fasteners.Unit: CD

Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.Unit: CD 2

Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.Unit: CD 2

N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door...

N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.Unit: CD 2

Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.Unit: CD

Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.Unit: CD

N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by...

N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.Unit: CD 2

H 3670 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Pan-American windows. It is right handed with a matching crank handle with a 2-5/8 in link arm....

H 3670 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Pan-American windows. It is right handed with a matching crank handle with a 2-5/8 in link arm. It has an L shaped mounting hole pattern that has 2 top holes that are 5-1/4 in from center of the top holes to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-5/16 in apart.Unit: CD

This items is a 3 in x 3 in "Stick-on" fiberglass screen patch for repairing holes and/or small tears in your fiberglass window screens and screen doors. It can be easily attached without using...

This items is a 3 in x 3 in "Stick-on" fiberglass screen patch for repairing holes and/or small tears in your fiberglass window screens and screen doors. It can be easily attached without using special tools. Easy to follow instructions are included.Unit: CD 5

Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8...

Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.Unit: EA

U 9005 is a bed frame clamp for 1 in frames. Zinc-plated heavy gauge steel construction to be used to hold bed frame meeting rails together. Easy to install with the included screw bolt.Unit: CD 2 ...

U 9005 is a bed frame clamp for 1 in frames. Zinc-plated heavy gauge steel construction to be used to hold bed frame meeting rails together. Easy to install with the included screw bolt.Unit: CD 2

Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.Unit: CD

Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.Unit: CD

N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on...

N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end.Unit: CD

N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They...

N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that makes it adjustable up to 3/8 in height. It can be used on pocket doors 1 in to 1-3/4 in thick and up to 100 lb. each.Unit: EA

TH 23077 is a right handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge...

TH 23077 is a right handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (optional). The heavy-duty die-cast zinc operator base, worm drive, gears as well as the steel arms and stud bracket are protected with the corrosive-resistant E-Gard coating process.Unit: CD

Heavy-duty die-cast housing with brass face and 5-pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate and 2 screws.Unit: CD

Heavy-duty die-cast housing with brass face and 5-pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate and 2 screws.Unit: CD

This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.175 in Dia. It is a top quality round, serrated...

This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.175 in Dia. It is a top quality round, serrated vinyl with a hollow core. Color is gray.Unit: EA

Black plastic housing, flat edge plastic roller, 1/16 in inside channel guide leg. Used by Premiere and others.Unit: EA

Black plastic housing, flat edge plastic roller, 1/16 in inside channel guide leg. Used by Premiere and others.Unit: EA