B & K INDUSTRIES

Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air...

Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Unit: EA

B & K Pipe Nipple, Nominal Size: 4 in, Threaded Connection, Schedule Rating: SCH 40, Steel, 8 in LUnit: EA

B & K Pipe Nipple, Nominal Size: 4 in, Threaded Connection, Schedule Rating: SCH 40, Steel, 8 in LUnit: EA

Durable polypropylene full clamp provides an easy and efficient way to secure pipes. Clamp grips, insulates and isolates the pipe from the mounting surface. Preloaded barbed nails allow pipe to...

Durable polypropylene full clamp provides an easy and efficient way to secure pipes. Clamp grips, insulates and isolates the pipe from the mounting surface. Preloaded barbed nails allow pipe to secured in any direction.Unit: BAG10

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.Unit: EA

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads: ANSI B1.20.1.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads: ANSI B1.20.1.Unit: EA

Full port, PTFE seat and packing, packing gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807,...

Full port, PTFE seat and packing, packing gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G.Unit: EA

High-impact CPVC construction for use in hot or cold fluid systems up to 180 deg F. Use with water and approved chemicals. 1/2 in MHT outlet. Beige color body with red wheel handle. TPE seal for...

High-impact CPVC construction for use in hot or cold fluid systems up to 180 deg F. Use with water and approved chemicals. 1/2 in MHT outlet. Beige color body with red wheel handle. TPE seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Unit: EA

NDS Flow Management, formerly Flo-Control, offers a range of specialty fittings. From expansion repair and compression couplings, to spring, swing check and ball valves, we offer a full line of...

NDS Flow Management, formerly Flo-Control, offers a range of specialty fittings. From expansion repair and compression couplings, to spring, swing check and ball valves, we offer a full line of products for irrigation, plumbing, pool and spa and industrial applications.Unit: EA

Easy quarter turn On/Off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose...

Easy quarter turn On/Off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO NSF 61.9 Approved, complies to ASME A112.18.1. Pipe threads comply with ANSI B1.20.1,...

-40 to 194 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G),...

-40 to 194 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61.Unit: EA

Meets the ANSI/ASTM A-197 specification for material, ANSI/ASME B.16.3, B16.14, B16.39 specifications for Dimension and ANSI B1.20.1 specification for thread.Unit: EA

Meets the ANSI/ASTM A-197 specification for material, ANSI/ASME B.16.3, B16.14, B16.39 specifications for Dimension and ANSI B1.20.1 specification for thread.Unit: EA